0
Hello there.
Int the top of the emergency brake pedal you will find a switch that makes contact when pedal is all pushed back.
It's actually very easy to remove. Just remove before the plastic protection of the lower part of the dash so you can have visual access to the all thing.
After you remove it (it's just a couple of screws or maybe 4), get down and look to the top of the pedal. There you will see the cable that connects to the release lever and on it's side you find the switch.
Now, take care not to brake the switch has you remove it. It has two side clips that must be pressed at same time. They will unleash the switch from the pedal assembly.
After you take it off, first check it state and lubricate it with WD40.
It is most likely that the problem is only lack of it. Try to press some time to let the lubricate get to the spring inside.
After that reinstall it and check if the problem is solved. If not, remove it again and Exchange it for a new one.
It is importante to remember that you must always what the problem came from, before you expend $$ in a probably unecessary part.
Cheers,
Anything, please ask. Oh... and... sorry for my bad English!!
What else can I help you with?
How do you replace the emergency brake light switch on a Mercedes e320 video?
To replace the emergency brake light switch on a Mercedes E320, first, locate the switch under the dashboard near the emergency brake lever. Disconnect the wiring harness from the old switch, then remove it by unscrewing or unclipping it. Install the new switch by securing it in place and reconnecting the wiring harness. Finally, test the brake lights to ensure the new switch is functioning correctly.
Remove brake switch E430 Mercedes?
Where is the brake switch in Mercedes Benz E320, 1999 located? How do I replace it?
How to replace brake light switch on a Mercedes vito van?
How do i change the 3rd brake light on a mercedes vito van.It is the brake light above the back door?
Why will 1988 RX7 auto convertible top clode but not open?
The emergency brake must be on for the top to open. If the brake light on the dash does not come on with the emergency brake on then you will need to replace the switch on the emergency brake.
Why will 1988 RX7 auto convertible top close but not open?
The emergency brake must be on for the top to open. If the brake light on the dash does not come on with the emergency brake on then you will need to replace the switch on the emergency brake.
How do you replace brake switch on a Mercedes-Benz?
To replace the brake switch on a Mercedes-Benz, first, disconnect the battery to ensure safety. Locate the brake switch, typically found near the brake pedal assembly; you may need to remove a panel for access. Disconnect the electrical connector from the old switch, unscrew it, and replace it with the new switch. Reconnect the electrical connector, reassemble any removed panels, and reconnect the battery to complete the installation.
How do you replace brake light switch on a 1994 Mercedes C280?
To replace the brake light switch on a 1994 Mercedes C280, first disconnect the negative battery terminal to ensure safety. Locate the brake light switch, which is typically mounted on the brake pedal assembly. Remove the electrical connector and the switch by unscrewing it or releasing any clips holding it in place. Install the new switch, reconnect the electrical connector, and reattach the battery terminal before testing the brake lights.
How do you replace brake lights switch on a mercedes-benz ml500?
http://www.youtube.com/watch?v=AWjIZBuPLZ0
How do you replace brake light switch for 2001 Mercedes Benz ML55 amg?
To replace the brake light switch on a 2001 Mercedes-Benz ML55 AMG, first, disconnect the negative battery terminal to ensure safety. Locate the brake light switch, which is typically found above the brake pedal. Remove the wiring harness from the switch, then unbolt or unscrew the switch from its mounting bracket. Install the new switch by reversing the removal steps, reconnect the wiring, and reattach the battery terminal.
How do you you replace 2003 Mercedes Benz ML 500 Brake Light Switch?
To replace the brake light switch on a 2003 Mercedes-Benz ML 500, first disconnect the negative battery terminal to ensure safety. Locate the brake light switch, which is typically found above the brake pedal. Remove the wiring harness and the switch by turning it counterclockwise or unfastening it as needed. Install the new switch by reversing the removal process, ensuring it is securely in place, and then reconnect the battery.
How to repLace front brake pads on Mercedes Benz S430?
How to replace front brake pads on Mercedes s430
Replace rear brake pads on Mercedes clk?
How much does it cost to replace brake pads on a 1999 Mercedes Clk?
