easier to buy a complete new light mate
take the glass of the front of the speedomiter then remove the cardbord !! then see if der is any missing bits or parts
Open the bonnet and locate the rear of the headlamp which is not working. Ease off the connector block with three wires to it.Pull off the large rubber weatherseal,then the rear of the bulb is exposed.Undo the "hairgrip" clip and pull out the bulb holding the connectors.Fit new bulb,lining up the tags with the slots,important do not touch the glass envelope on the new bulb.Replace the clip,seal and wiring connector.
it is easier to replace the whole headlight unit (as the glass is sealed to the body), but, if you have just the glass... remove the grill (3 screws), remove the headlight unit (one pop-up, 3 small bolts), place headlight unit on workbench, remove 3 retainer clips, cut sealant around glass, remove glass, apply new sealant to cleaned surface, press glass in place, reverse the above procedure... or just buy the whole thing off ebay ($89)
the glass cover on the headlight is not servicable, they are glued during assembly. you have to replace the entire headlight globe or headlight assembly.
There are two metal clips behind the each headlight. Pull these upward, and the entire headlight will come out very easily. To replace the bulb, do so without touching the glass parts of the halogen bulb,and replace the headlight. Secure with the two clips. See, it was easy.
WHAT DOES THIS MEAN...HEART OF GLASS
To replace the headlight on a 2009 Jeep Laredo, first, open the hood and locate the headlight assembly. Remove the screws or clips securing the assembly and gently pull it out. Disconnect the wiring harness from the back of the headlight bulb, then twist and remove the old bulb. Insert the new bulb without touching the glass, reconnect the wiring harness, and reassemble the headlight assembly.
To replace the headlight on a 2005 Ford 500, first, open the hood and locate the headlight assembly. Disconnect the electrical connector by pressing the tab and pulling it out. Remove the headlight bulb by turning it counterclockwise and replacing it with a new bulb, making sure not to touch the glass with your fingers. Finally, reconnect the electrical connector and test the new headlight to ensure it works properly.
To replace the headlight on a 1998 Acura CL, first, open the hood and locate the headlight assembly. Disconnect the electrical connector from the back of the headlight bulb, then remove the retaining clip or screw holding the bulb in place. Carefully take out the old bulb and replace it with a new one, ensuring not to touch the glass with your fingers. Reattach the retaining clip or screw, reconnect the electrical connector, and test the headlight before closing the hood.
To change the wing mirror glass on a Vauxhall Corsa, start by carefully prying off the old glass using a flathead screwdriver or a similar tool to avoid damaging the housing. Once removed, clean the area, then attach the new glass by aligning it with the mounting clips and pressing it into place until it clicks securely. Finally, test the adjustability to ensure it’s properly installed. If needed, consult your vehicle's manual for specific instructions regarding your model year.
To replace a headlight on a 2006 Buick Terraza, first, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector by pressing the release tab and pulling it off. Remove the headlight bulb by turning it counterclockwise and then replacing it with a new bulb, ensuring not to touch the glass with your fingers. Finally, reconnect the electrical connector and test the new headlight before closing the hood.
To replace a headlight bulb in a 1991 Cadillac Brougham, first, open the hood and locate the headlight assembly. Disconnect the wiring harness from the back of the headlight, then twist and remove the old bulb from the socket. Insert the new bulb, ensuring not to touch the glass with your fingers, as oils can cause it to burn out. Finally, reconnect the wiring harness and test the headlight before closing the hood.