Take it to the dealer.
Take it to the dealer
To reprogram the alarm remote for a Porsche boxster, one must put the key into the ignition and turn to position 1, first click. After, you must then turn the ignition off and leave the key in for approximately 15 seconds. The last step is to start the car; this will successfully reprogram the remote.
2006 jetta tdi both key remote not working
The key fob for a 2001 Mercedes ML320 typically features remote locking and unlocking of the doors, a panic button for emergencies, and a trunk release function. It may also include a built-in key blade for manual access. Depending on the specific model and options, some fobs may have additional features like a keyless entry system.
To reprogram the remote key for a 1996 Mercedes S320, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Within 5 seconds, press and hold the "Lock" button on the remote for approximately 5 seconds. Then, turn the key back to the "Off" position and remove it. Your remote should now be reprogrammed and ready to use.
Book says Key on to 2 nd position then remove Hold lock button down and press unlock 5 times ( within 60 seconds)
use your key and reprogram your remote from the dealership
One reason that your remote key will not unlock your Mazda 6 is that a fuse is blown. You may need to replace the batteries in the remote or reprogram the remote. A bad body control module is another reason the remote will not unlock the doors.
Hi, Try this web site www.programyourremote.com according to the site you have to hold the remote buttons for up to 30 seconds. .... Joe.
To reset the remote locking for a Ford Mondeo 2001, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Then, within 5 seconds, press the "Unlock" button on the remote. This should reset the system, allowing the remote to function properly. If this does not work, you may need to replace the remote's battery or reprogram it following the vehicle's manual instructions.
To reprogram a keyless entry remote for a 2001 Mitsubishi Eclipse Spyder, first, get into the vehicle and close all doors. Insert the key into the ignition and turn it to the "On" position (not starting the engine) and then back to "Off" five times within ten seconds. After the fifth turn, the doors should lock and unlock, indicating the vehicle is in programming mode. Press any button on the remote you wish to program; the doors will lock and unlock again to confirm successful programming.
To reprogram a remote key fob, first, ensure you have the vehicle's manual, as the process can vary by make and model. Typically, it involves entering the vehicle, closing all doors, and turning the ignition on and off a specific number of times. Afterward, press a button on the key fob to sync it with the car. If unsure, consult the owner's manual or a professional locksmith for assistance.