How do you reset the service indicator on 2007 Mercedes vito
Break pads should be checked if not replaced. Check condition of rotors at the same time.
mercedes benz vito 111 service reset
To reset the service indicator on a 2007 Mercedes SL550, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn the ignition off and back on to check if the service indicator has been reset. If the indicator is still showing, repeat the steps.
You have to have the computerized equipment- get to a mechanic/dealer who has one.
Go to yuotube and type there this question.
To reset the service indicator on a 2007 Mercedes SLK 350, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within five seconds. Afterward, turn the ignition off and then back on to verify that the service indicator has been reset. If successful, the service light should no longer be illuminated.
Magic and luck, with a little skill. Good luck.
To reset the service indicator light on a 2007 Mercedes C280, first, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and restart the engine to check if the service light has been reset. If the light remains, repeat the procedure.
To reset the battery indicator light on a 2007 Mercedes SL 550, first, ensure the vehicle is turned off. Then, disconnect the negative battery terminal for about 10-15 minutes to reset the system. Reconnect the terminal and start the car to see if the light has reset. If the light remains on, it may indicate an underlying issue with the battery or charging system that should be checked by a professional.
To reset the oil change reminder on a 2007 Mercedes ML 320 CDI, turn the ignition to the "ON" position without starting the engine. Press the gas pedal fully three times within five seconds. Then, turn the ignition off and back on to confirm that the oil change indicator has been reset. If it doesn’t reset, repeat the process.
YES!!!!!!!!!!!