You can't. You must fix the problem. The SRS computer will see the fix and shut off the light. There's no way to clear the code manually.
To reset the run flat tire warning light on a 2007 Mini Cooper without the indicator button, you can try disconnecting the car battery for about 15 minutes and then reconnecting it. This may reset the warning light. Alternatively, you can use an OBD-II scanner to reset the tire warning system if you have access to one. If these methods don't work, consider consulting a Mini Cooper specialist for a more cost-effective solution.
When the Mini cooper 2003 airbag light is permanently on, then it needs to be reset.
To reset the warning light with a triangle and circle on a 2005 Mini Cooper, first turn on the ignition without starting the engine. Press and hold the trip reset button on the instrument cluster until the warning light turns off, which usually takes about 5 to 10 seconds. If the light persists, refer to the owner's manual or have the vehicle checked for any underlying issues.
how to reset the brake service indicator on mini cooper s 2011
To reset the brake pad replacement warning light on a 2005 Mini Cooper, turn the ignition key to the "On" position without starting the engine. Press the accelerator pedal three times within five seconds, then turn off the ignition. Start the car to ensure the warning light has been reset. If the light remains on, you may need to check the brake pad sensors or consult a mechanic.
veiw warning lights on speedo for mini cooper55 reg check my answer
service check ?
it is your run flat tyre wraning you could hav a puntcher to reset the light there isd abutton under the handbrake
Tire pressure warning light.
if no one knows go to google.
A list of dash warning lights for a Mini Cooper can be found in the owner's manual and the service manual. Each light denotes a specific problem with the vehicle.
Buy the oxygen sensor and fix the car and get the light reset !