Try this...
In the centre console where the radio and sat nav is (Nowhere near the actual clock) click on:
Serv - System - Time - use your up and down arrows and press ok and you see the hands on the clock start to move.
I have a CLK and that's how you change mine - it took me about an hour sat in the car pressing everything and I have the manual, it's just not in there!
I thank that antalog time is the time on a analog clock, It makes since analog time on a analog clock.
assuming this is the digital clock, you hit the clock button on the dash, followed by the reset button followed by the clock button. at this point, you should be able to hit the clock button to advance numbers, and the reset button to change the numbers you are setting. if its the analog clock, pull on the knob and turn it
An analog clock is a clock with numbers in a circle and a minute and hour hand to tell the time.
To change the clock you have to use the menu on the steering wheel. I don't remember which mode but toggle thru and it will ask the date, time of day then once you ok it, it will fix the analog as well as the digital.
Settings>Display>Clock>Analog
To reset the clock on a 2000 Mercedes CLK430, first turn the ignition to the "On" position without starting the engine. Then, press the "Clock" button on the dashboard to enter the clock setting mode. Use the left and right buttons to adjust the hours and minutes, respectively, and once set, press the "Clock" button again to save the changes. Finally, turn off the ignition to complete the process.
Yes
To reset the clock on a 2003 Mercedes SL500, first, turn on the ignition without starting the engine. Then, press the "Clock" button on the dashboard or the "Menu" button on the COMAND system, if equipped. Use the control knob to adjust the hours and minutes, and press the knob to confirm each setting. Finally, exit the menu to save the changes.
An analog clock.
hold down the trip reset button for about 10 seconds then the minute hand should start moving
To reset the service clock on a Mercedes CLK, turn the ignition to the "on" position without starting the engine. Press the gas pedal fully three times within five seconds. After that, the service indicator should reset, and you can turn off the ignition. For some models, you may need to navigate through the onboard menu using the steering wheel buttons to access the service settings for the reset.
Just heard ten minutes ago from my son who has borrowed my 2000 s500 telling me he has reset the clock via the radio in the car.