To reset the engine management light on a Mini Cooper, you can use an OBD-II scanner to read and clear any diagnostic trouble codes (DTCs) that triggered the light. Alternatively, disconnecting the car's battery for about 15 minutes can also reset the light, but this may erase other settings. Always ensure that any underlying issues are resolved before resetting the light, as it may illuminate again if problems persist.
if no one knows go to google.
You can reset the engine management light Jaguar X type by checking the original Jaguar manufacturer's or owner's manual and making sure that you the reset option is available.
Buy the oxygen sensor and fix the car and get the light reset !
I changed my rediator and the engine light came on and remained on, how do i get this light off
If your engine management light comes on, there may be a problem with your vehicle. The only way for the light to be removed is by resetting the light. The light needs to be reset by someone with a resetting tool. This is generally your local mechanic.
To reset the service oil light on a 2004 Mini Cooper, first turn the ignition key to the "on" position without starting the engine. Then, press the accelerator pedal three times within 10 seconds. After doing this, turn the ignition off and then back on to check if the oil light has reset. If successful, the light should no longer be illuminated.
To reset the engine management light on a Citroen Picasso, press and hold the trip reset button. Turn ignition key to position 2. By keeping the button pressed in, the trip meter will count down. When zero is reached, release the trip button and the start car service light will be extinguished.
Disconnect the red battery wire then reconnect it.
When the Mini cooper 2003 airbag light is permanently on, then it needs to be reset.
how to reset the brake service indicator on mini cooper s 2011
disconnect battery for 15 mins...if it come back on there is a reason for the light being on...if so google vectra management light paperclip...hope this helps
To reset the oil service light on a 2003 Mini Cooper after an oil change, turn the ignition to the "On" position without starting the engine. Press and hold the trip reset button on the speedometer until the oil service light starts to blink. Once it blinks, release the button and press it again until the light goes out. This indicates that the oil service light has been successfully reset.