1
Enter the VW Rabbit with the ignition key.
2
Close the door.
3
Hold down the odometer trip reset button. This button is on the right side of your instrument panel.
4
Insert the key into the ignition and turn it to the "ACC" position.
5
Wait for the wrench symbol to illuminate, then release the button.
6
Press the "MIN" button on the left side of the instrument panel.
7
Wait 10 seconds, then remove the key from the ignition and exit
How do you reset the service indicator on 2007 Mercedes vito
Exactly the same as the 2008.
with the dealer computer.
2008 Rabbit does not have IAT sensors. Only 2005.5-2007 Rabbits.
1000 lbs. and 100- 150lbs of tongue weight
To reset the service indicator on a 2007 Mercedes SL550, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn the ignition off and back on to check if the service indicator has been reset. If the indicator is still showing, repeat the steps.
mercedes benz vito 111 service reset
how to reset the brake service indicator on mini cooper s 2011
To reset the oil life indicator on a 2007 Cadillac SRX, first turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal slowly three times within five seconds. Then, turn the ignition off and start the engine to ensure the oil life indicator has been reset.
You have to have the computerized equipment- get to a mechanic/dealer who has one.
To reset the service indicator wrench:Hold down the odometer reset button with the ignition offWait for the trip indicator to show 0's. Then turn the ignition on, but don't start the carLet go of the reset button, and press the M button.
Go to yuotube and type there this question.