1) Start the car and switch off. 2) Switch the ignition on and press the trip counter button twice. 3) Press and hold the button and switch the ignition off and on again while holding the button until the system acknowledge the setting with a beep tone (after about 20 seconds)
how do you reset service d light on mercedes gl450
I don't see why it wouldn't be.
You need a scanner. Very expensive. go to auto dealer and have them reset.
To reset the service light on a Mercedes-Benz M Class, disconnect the positive cable on the battery for a few minutes. If this does not do the trick, turn the key on and pump the gas three times then turn the key off. Start the vehicle. The light should be off.
Mercedes vito Service Reminder Reset
you buy a reset tool from parts shop
take a hammer to the light
To reset the service light on a 2006 Mercedes ML350, first turn the ignition to the "on" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off and back on. The service light should now be reset.
To reset the service light on a Mercedes C-Class (C180 Kompressor), turn the ignition key to position "2" without starting the engine. Press the gas pedal three times within 10 seconds, then turn the ignition off. Restart the engine, and the service light should be reset. If this method doesn’t work, consult your owner's manual for specific instructions related to your model year.
To reset the service indicator on a Mercedes-Benz A-Class W169, first, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn the ignition off and back on to check if the service light has been reset. If necessary, repeat the process.
To reset the service light on a Mercedes SL63, first, turn on the ignition without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off and then back on to verify that the service light has been reset. If the light remains on, repeat the process to ensure it was done correctly.
I reset the FSS by refering to the Owner's Manual.