reset run flat indicator
Turn on the key and scroll though the menu on the instrument cluster using the arrow buttons. When the run flat indicator message comes up, push the reset button. Once you do that, it will ask you to confirm the reset.
To reset the run flat indicator on a BMW 5 Series, first ensure that all tires are properly inflated. Then, turn on the ignition without starting the engine. Navigate to the vehicle settings on the iDrive system, select "Tire Pressure Monitor" or "TPM," and choose the option to reset. Confirm the reset, and the indicator should turn off after a successful reset.
Magic and luck, with a little skill. Good luck.
Hold down the tire indicator button for about 10 seconds while driving. That is located under the Hand Brake.
i have a 520 d bmw 06 have put a normal tyre on and other 3 tyres are run flats dash board still comes up with a flat tyre ,how do i reset this please
turn the ignition to the run position but do not start it, pump the gas pedal 5 times til you hear a chime noise that indicates that the oil change indicator light is reset.
To reset the run-flat light on your vehicle, first, ensure that the tires are properly inflated and that there are no issues with the tires themselves. Next, turn on the ignition without starting the engine and press the gas pedal three times within ten seconds. Finally, turn off the ignition and restart the engine; the light should be reset. If the light remains on, consult your vehicle's owner manual or a professional mechanic for further assistance.
Turn ignition to "run" (don't start) push the gas pedal 3 times within 5 seconds.
if you're currently doing another run, then yes, you have to reset.
Run flat tires are special tires that can drive even if punctured and completely flat. Their sides are specially reinforced by steel or rubber so they can support the whole car mass. The indicator indicates if a tire lost pressure i.e. was punctured. If a warning comes out, you have to stop driving and inspect the tire. If it is flat, you can continue driving for another 100 miles (160 km) but you must not exceed the speed of 60 mph (90 kph). Sometimes there could be also a false alarm. Especially if you have put new tires of another diameter.
Turn the ignition to run (one position before starting engine). Press and release SETUP to display "OIL LIFE xxx% HOLD RESET = NEW". Press and hold RESET for 2 seconds and then release to reset oil life to 100%. Turn ignition off and then start engine to verify the indicator has been reset.