Unfortunatley you will have to get it reset by a garage with a diagnostic computer. Costs around £25 to £35
With a scan tool.
Your VW Beetle check engine light comes on when there is a problem with one of a number of sensors on the vehicle. Take the car to the dealership to have them determine the engine problem and reset the light.
How do you reset dashboard brake light on vw passat
To reset the oil change light on a VW Jetta, first turn the ignition on without starting the engine. Then, press the gas pedal three times within 10 seconds. After that, turn off the ignition and start the engine to ensure the oil change light is reset. If the light remains on, repeat the process.
To reset the oil light on a VW Bora, first turn on the ignition without starting the engine. Press the gas pedal fully three times within ten seconds. Then, turn off the ignition and start the engine; the oil light should be reset. If the light remains on, repeat the process or consult your vehicle’s manual for further instructions.
It is very easy to reset the check engine light on a VW car. All you have to do is to push the wrench button located near the trip reset. You will hold it in while turning on the ignition. after the service message appears, let go of the wrench button and hold in the minute button. Turn the ignition off and the computer will reset.
There is nothing to "reset" for the 1999 VW Beetle.
how to rest airbag light on VW t5 ,thanks
To reset the engine light on a 2008 VW Eos, first, use an OBD-II scanner to read and clear any diagnostic trouble codes (DTCs) that triggered the light. If you don't have a scanner, you can disconnect the battery for about 15 minutes to reset the system. After reconnecting the battery, check if the light remains off. If the light returns, it may indicate an underlying issue that needs to be addressed.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.You need to sell the car, you will go broke trying to keep the check engine light off on a VW, I am speaking from experience.
To reset the brake service light on a 2005 VW Polo 1.2, turn the ignition on without starting the engine. Press the accelerator pedal fully three times and then turn the ignition off. Start the engine, and the brake service light should be reset. If the light remains on, you may need to check for any underlying issues with the braking system.
You buy a new one. They do not reset.