To set the clock in a 2003 Mercedes-Benz E320, turn the ignition to the "On" position without starting the engine. Press the "Clock" button on the audio system or use the "Time" button on the instrument cluster, depending on your model. Use the "Tune" knob or buttons to adjust the hours and minutes. Once set, the clock will automatically save the changes.
how do you set the clock on a 2003 chevrolet trailblazer
You can set the clock in your 2003 Ford Escape by holding in the volume button. With the volume button held in the clock display will flash. You can then set the clock by turning the tuning knob.
Switch it off and then on again.
To set the clock in a 2001 Mercedes-Benz CLK 430, turn on the ignition without starting the engine. Press the "Clock" button on the dashboard to activate the clock setting mode, then use the "+" and "–" buttons to adjust the hours and minutes. Once the correct time is displayed, press the "Clock" button again to save the settings.
To set the clock in your 2004 Mercedes-Benz C320, first, turn on the ignition or start the engine. Then, press the "Clock" button on the audio system or use the control knob to navigate to the clock settings. Adjust the hours and minutes using the corresponding buttons or knobs, and confirm your changes. Finally, press the "Clock" button again to save the new time.
hold clock+seek for Hours hold clock+discs for minutes
i don't know ,sorry
Press and hold the set button until the clock appears, then adjust the time using the scan buttons.
a picture of the radio would be helpful
Hold the volume knob in. The clock will flash. Adjust the clock with the tuning knob while holding the volume knob in.
This information can be found in the owner's manual.
To set the clock in a 2003 Acura MDX, turn on the vehicle and locate the clock adjustment buttons on the dashboard or the audio system. Press the "H" button to adjust the hour and the "M" button to adjust the minutes. After setting the desired time, press the "Clock" button again to confirm the changes. Make sure to check if the time is set correctly after making adjustments.