To split the headlight indicator on a 2000 Mercedes-Benz SLK, first, ensure the car is turned off and the key is removed. Carefully remove the headlight assembly by unscrewing the retaining bolts and disconnecting the wiring harness. Once the assembly is out, you can access the indicator section and replace or repair it as needed. Reassemble the parts by reversing the disassembly steps.
clear maint code from 2001 slk 320
I have 1997 slk 230, and it's slightly faster than 2000 323ci, especially after 130-140 kph. Both cars have manual tranny.
To change the headlight on a Mercedes SLK, first, open the hood and locate the headlight assembly. Remove the cover or access panel behind the headlight, then disconnect the electrical connector and unscrew the retaining clips or screws holding the bulb in place. Replace the old bulb with a new one, making sure not to touch the glass with your fingers, and reassemble the components. Finally, test the headlights to ensure they are functioning properly.
high test
To reset the service indicator on a 2007 Mercedes SLK 350, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within five seconds. Afterward, turn the ignition off and then back on to verify that the service indicator has been reset. If successful, the service light should no longer be illuminated.
This would be something that is done by the manufacturer. You can do an image search in order to find this information.
There were five different R170 Mercedes SLK models:SLK200 (1996-2000)SLK200 Kompressor (1996-2004)SLK230 Kompressor (1996-2004)SLK320 (2000-2004)SLK32 AMG (2001-2004)The SLK was built in Bremen, Germany, however SLK320 models were built in East London, South Africa. Total number of SLK 320 models are 4,562.
The 2014 Mercedes-Benz SLK-Class's engine produces 229 ft-lbs. @ 2000 rpm.
The 2013 Mercedes-Benz SLK-Class's engine produces 229 ft-lbs. @ 2000 rpm.
The 2012 Mercedes-Benz SLK-Class's engine produces 229 ft-lbs. @ 2000 rpm.
To change the headlight bulb on a Mercedes-Benz SLK, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the back of the headlight assembly; for some models, you may need to remove a cover or panel. Disconnect the electrical connector from the old bulb, then remove the bulb by turning it counterclockwise. Install the new bulb by reversing the process, making sure not to touch the glass with your fingers, and reconnect the electrical connector.
To reset the maintenance service indicator on a 2005 Mercedes SLK 350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn off the ignition and start the engine; the maintenance light should be reset. If the light remains, repeat the process.