To split the engine case on a 1980 Yamaha 175, first ensure the bike is properly disassembled, removing the necessary components such as the carburetor, exhaust, and any electrical connections. Next, drain the oil and remove the bolts securing the engine cases, typically found around the perimeter. Carefully separate the cases using a soft mallet or a case splitter tool, ensuring you don’t damage any internal components. Lastly, inspect the gaskets and seals for replacement as needed before reassembly.
Yes
I have an 1980 Yamaha Enticer 250 (ET250D). Here's what the sticker under the hoods says...The oil capacity for the "Chain Case" is 15.21 oz (or 450 cc).If you are talking about the engine crankcase, there is no oil in the crankcase of a two-stroke engine. It is lubricated by the oil that is mixed into the gas.I am not sure what weight oil to use. The dealer told me to use Yamaha Chain Case Oil (but he didn't know the weight of the oil).Hope this helps!TK
The engine number G111E007908 corresponds to a Yamaha YZ250 model from the year 2001. Yamaha typically uses a specific coding system for their engine numbers, where the first digits indicate the model year. In this case, "G111" identifies it as a 2001 model.
The Yamaha engine serial number 5AH-026085 indicates that the engine was manufactured in 2005. Yamaha's serial number system typically includes a prefix that corresponds to the year of manufacture, and in this case, "5AH" signifies the 2005 model year.
1nh-001043
It is located on the left hand side of the case just below thw cylinders on the case it's self.
On a thin plate next to the crank case.
its takes 2500ml in the engine with filter and 300 ml in transfer case.
To determine the year of your Yamaha YZ125 with engine number E111E-010752, you can refer to Yamaha's VIN decoding resources or contact a Yamaha dealer. Typically, the first digit of the engine code can indicate the model year. In this case, the YZ125 model was produced in various years, so verifying through Yamaha's official channels will provide the most accurate information.
The oil fill is on the right side of the engine below the carb on the upper part of the case.
not eactly you will need a transfer case
To find the year of a Yamaha R1 engine, you can check the engine serial number, which is typically stamped on the engine case. The first few characters of the serial number often indicate the model year. Additionally, you can refer to the owner's manual or service documentation, which usually includes a guide for identifying the model year based on the VIN (Vehicle Identification Number) or engine number. If needed, contacting a Yamaha dealer with the engine number can also provide accurate information.