Only if it is an early mk2. All mk1 sharans, galaxy's and alhambras have 6 3point harnesses and a lap belt in the centre seat.
Make sure you are not latching it into the buckle for the middle seat belt.
You will probably end up having to replace the belt as I don't think there is a way to tighten it.
no, but you have to connect the seatbelt connected to the actual car to the booster seat. but there is a seat belt in the middle for a car seat.
To effectively secure a booster seat without using the latch system, you can use the vehicle's seat belt. Make sure the seat belt goes through the designated belt path on the booster seat and buckle it securely. Tighten the seat belt to remove any slack and ensure the booster seat is stable and properly positioned. Regularly check the seat belt to make sure it remains secure during use.
♥Do you know how to tighten your seat belt? If so, do the same with the belt. Or depending on your size ask your school or communty to get a belt for you.♥
There are 3 seatbelts in the back seat of a Chrysler Sebring Convertible. The middle seat belt is just a lap belt though.
yhere is a seat belt module under middle front seat try disconnect battery first that worked for me
Its a lap belt.
seat belts have a unlimited warranty. the belt gets twisted and they replace for free!
To replace the middle rear seat belt on a Ford Mondeo MK3 (2001), first, remove the rear seat cushion by unbolting it from the frame and lifting it out. Next, access the seat belt mechanism by removing any covering or trim that conceals it. Detach the old seat belt from the anchor points and install the new one by following the reverse order, ensuring it is properly secured. Finally, reattach the rear seat cushion and test the seat belt for proper operation.
a 1987 mighty max has 3 sets of seat belts. the middle belt is just a lap belt