0
What else can I help you with?
Does a 1972 350 Ci truck engine have a 2-bolt or 4-bolt main?
should be 4-bolt
What is the torque spec for front center bolt?
97 buick lesabre center front wheel bolt size
What actors and actresses appeared in The Films of Robert Bolt - 1972?
The cast of The Films of Robert Bolt - 1972 includes: Robert Bolt as himself Richard Chamberlain Sarah Miles Laurence Olivier as himself
Can 1987 center bolt heads bolt up to an older 305 block?
no
How do you measure lug patterns?
On a five bolt pattern measure from outer edge of one bolt then across to the middle of another skipping one bolt hole( not quite the diameter). On six or four bolt patterns measure across from bolt center to bolt center as you would the diameter if it were a circle.
What is the bolt pattern size for a 1972 Buick skylark?
5X120.7
What is the bolt pattern on a 2003 gti?
count the number of studs, then Measure it. the distance from the center of one stud to the center of the one across from it is your bolt circle.
What is the bolt pattern for a 1972 Plymouth Scamp?
The bolt pattern for a 1972 Plymouth Scamp is 5x4.5 inches (5x114.3 mm). This means there are five bolt holes and the distance between the centers of the opposing holes is 4.5 inches. This bolt pattern is common among several Chrysler vehicles of that era.
How do you measure tire rim bolt pattern center to center or overall outside diameter?
Center of the bolts
How do you know if a rifle is a rimfire or centerfire rifle?
If you look at the bolt face, a center fire rifle will have the firing pin located in the center of the bolt. A rimfire rifle will have the firing pin located on the outside edge of the bolt.
What is the bolt pattern on a 2003 VW GTI?
count the number of studs, then Measure it. the distance from the center of one stud to the center of the one across from it is your bolt circle.
What is the bolt pattern for a 2001 Chevy Impala?
Bolt pattern is 5 X 115, which means 5 bolts, spaced 115 millimeters apart at their farthermost distance. Measure from center of bolt to center of bolt on opposite side. This is best done with a caliper.
