To reset the spanner symbol on the dashboard of a Peugeot 206 1.4 HDi, turn the ignition on without starting the engine. Press and hold the trip reset button on the dashboard, then turn the ignition off while continuing to hold the button. After a few seconds, turn the ignition back on, and the spanner light should reset. Release the button, and the warning light should now be gone.
it is due for a service.
The Peugeot 206 is a subcompact car. One has to remove the full light to change indicator bulb. A spanner can be used to remove the light cluster. Break the spanner off, and rebuild.
To reset the service spanner light on a Peugeot 206, you need to turn on the ignition without starting the engine. Press and hold the trip reset button on the dashboard, then turn the ignition off and back on while continuing to hold the button. After a few seconds, the light should reset and turn off. Release the button, and the service light should be gone. If it persists, consult your vehicle manual or a professional for further assistance.
computer's code
lick my shaft
it means the car is due for a service
The service light is a little spanner which stays illuminated on main display on start up of the engine, this is a simple reset if home servicing and no diagnostic plug in from dealer necessary.Procedure to Reset Peugeot Service Light as follows:1. Switch the Ignition Off2. Press and hold the trip meter (mileage reset) button on the dash3. Now switch the ignition to the ON position4. Keep the button pressed for 10 seconds5. The display will read '0' and the service symbol will extinguish. Works on most models of manufacturer, for example.Peugeot106(1999 on)Peugeot 206 (1998 on)Peugeot306(1996 on)Peugeot307(1996 on)Peugeot406(1998 on)Peugeot607(2000 on)Peugeot806(1999 on)Peugeot Expert (1999 on)Peugeot 807 (2002 on)Peugeot Partner (1999 on)Peugeot Boxer (2002 on)
No, as far as I can see it does not.
A similar car to the Peugeot 206 is the Peugeot 205 which the Peugeot 206 is modeled after with minor modifications and upgrades from the Peugeot 205 to the Peugeot 206.
Switch ignition OFF Press and hold in button between speedo & water temp Switch ignition ON (not start) Keep button in for 10 seconds Display will now read zero and "spanner" symbol gone Relaese button & switch ignition OFF
How to disable Peugeot 206 immobilizer?