replace the burnt out bulb
It will automatically go off when all the brake lights are in working order. Don't overlook the center brake light. :)
After repairing the failure that caused the code, the lights will reset themselves.
To reset the message center on a Volvo S60, start by turning on the ignition without starting the engine. Press the "Menu" button on the center console, then navigate to "Settings." Select "System" and look for the option to reset or clear messages. Confirm the action, and this should reset the message center.
To reset the message bulb failure position light on a 2002 Volvo V70 XC, first ensure that all bulbs are functioning correctly, including the brake lights, turn signals, and position lights. After confirming that there are no faulty bulbs, turn the ignition to the "ON" position without starting the engine. Then, press and hold the trip odometer reset button until the message disappears from the display. If the light persists, it may indicate a deeper electrical issue that requires further inspection.
Remove the negative battery terminal (-) for about 15 minutes and most codes will reset.
To reset the service light on a Volvo XC90, start by turning the ignition to the "ON" position without starting the engine. Press the brake pedal and then press the gas pedal three times. Next, turn the ignition off, and then turn it back to the "ON" position again. The service light should now be reset.
how do you reset engine light on 1991 volvo 240
To reset the bulb failure light on a 2004 Volvo S60, first, ensure that all exterior lights, including headlights, taillights, and turn signals, are functioning properly. If any bulbs are burned out, replace them. Once all bulbs are confirmed working, start the vehicle and allow the system to reset, which may take a few minutes. If the light remains on, you may need to disconnect the battery for a few minutes and then reconnect it to clear the warning.
In order to get your SRS Service Airbag light reset, You have to go to the Volvo dealership.
how do you reset the alarm system service light on a 2001 volvo s80
To reset the "Check Parking Brake" message on a Renault Scenic, first ensure that the parking brake is fully engaged and then disengaged. Next, turn the ignition on without starting the engine and press the brake pedal. Finally, navigate to the vehicle settings on the dashboard display and select the option to reset warnings or service messages. If the message persists, it may indicate a more serious issue that requires professional inspection.