there is a tab inside the front wheel well you can use a screwdriver to release the assembly, and change the bulb. It is also in the owners manual as well with a picture and description
Take hold of the 2000 Mitsubishi Sport front side marker lightbulb connector. Push the connector in and turn at the same time. Do the same thing with the lightbulb. Reverse the process to install the new front side marker lightbulb.
To change the front driver side marker on a 2000 BMW Z3, first, open the hood and locate the marker light assembly. Use a flathead screwdriver or a trim removal tool to gently pry the marker light out of its housing. Disconnect the wiring harness from the old bulb, replace it with a new bulb, and then reconnect the harness. Finally, push the new marker light back into the housing until it clicks into place.
2000 Toyota Celica have timing chains.
if you have to ask how to replace the belt you should not open the hood take it to a shop
Buy the Tippman they are GREAT markers. no match to a $2000 marker
according to Dayco timing belts it is 120.000mi
First remove the xplener from the docle double ring mount. After that take the right o ring conducive off, and then replace with the right mount nut bracket. And vice versa ....thats all there is to it.
no. it has a chain not belt. it should last as long as the car.
pop the lense off from the out side of the car. Once the lense is off unplug the wires from the bulb plug, the marker should then pull right out. If light is not working but the bulb is goof it may be the plug inside the marker light, as I just found out todday
It should only cost about $50-$90 to replace the Flywheel of a 2000 Ford Windstar, is a person is doing the work themselves. If they are not it can cost $150+ depending on labor charges.
If your vehicle keeps overheating, you should flush the cooling system, replace the coolant, and replace the thermostat. In fact, you should have done that before this.
you should go to the place that you bought it from and let them replace it because if you do it you risk tripwireing the radio meaning that it wont work