To install a water pump on a 1989 VW Cabriolet, first, disconnect the battery and drain the cooling system. Remove any necessary components, such as the timing belt or accessory drive belts, to access the water pump. Clean the mounting surface, apply new gasket material if required, and install the new water pump, ensuring proper alignment. Finally, reassemble all removed parts, refill the cooling system with coolant, and reconnect the battery.
There is no such thing as an 89 El Camino
it on the starter
it is located right under the rear passenger seats. just lift up the bottom part of the seat and you will see 2 hoses and some wiring that's your fuel pump
located with the timing chain, kinda a pain to change for a water pump if needed i can give details
How long does it take.to change a waterpump on a 89 f250
Drain the water from your 1989 Chevy Corsica cooling system. Remove the water pump belt. Remove the water pump return hose. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
where is the fuel pump on a 89 Mazda b2200
You won't have heat, and the engine will overheat. Coolant seepage will be present in the weep hole of the water pump, as well.
89 inch lbs.
On the front (passenger side) of the engine.
I plugged a water pump on a 89 mustang 5.0 with jb weld steel stick, if done properly it will stop your leak. however if a lot ccolant is comming from the weep hole then you need to replace the water pump.
Left hand side under the exhaust manifold