To enter the radio code for a 2003 VW Jetta, first turn on the ignition and then the radio. The display will show "SAFE" or "LOCK." Use the preset buttons (1-4) to input the code, pressing the corresponding button for each digit. After entering the full code, press the "MODE" or "OK" button to confirm and unlock the radio.
Many persons have tried leaving the car on for at least an hour, then turn on the radio and it will reset itself. If that doesnt work, it is best you find a VW dealership and give them you VW serial number and they will find a code for you radio that will be able to make it work.
To enter the radio code for a 1996 VW Cabrio, first turn on the ignition and the radio. If the radio displays "CODE" or "SAFE," use the preset buttons (1-4) to enter the numeric code. For example, if your code is 1234, press button 1 once, button 2 twice, button 3 three times, and button 4 four times, then press the "SCAN" or "BAND" button to confirm. If entered correctly, the radio should unlock and start functioning.
In order to reset the radio code for VW Beta 3 radio,you will need to know the make and model of the vehicle. You can call your local VW dealer with that information and they can supply you with the necessary code.
remove the radio of the car than it will be a # on the radio call your locar vw service dealer to ask for the code.
you will need to leave the radio on for 1 hour so the radio can reset itself then you can re-enter the code.
Hi the answer is yes the radio is coded, you should find the code in your VW handbook . Regards Norman
you have to enter the 4 digit safe code found in your owners manual
This problem is now sorted. I have thrown the old unit in the bin and purchased a new unit from the shop
Take your car to the vw dealership and they will give will put the code into your radio, however they will most likely charge you $100 dollars for getting the code for you and putting it in the radio. I see about 3-4 cars a day come in for radio codes so once you get that code keep it in a safe place you might need it again. On my 1996 VW Jetta you must hold down the right seek or scan button until the display blanks out. Then you can enter the unlock code.
Email me the code your radio displays and I will return you with the unlock code -- support@totaldream.org
you must enter the 4 digit code found in the owner's manual