The brake light switch is located on the brake pedal assembly.
1. Remove the cover below the instrument panel
2. Remove the electrical connector.
3. On the switch their is a locking tab the prevents rotation. Press the "tab" and rotate the switch 90 degrees.
4. Remove switch.
Where is the brake switch in Mercedes Benz E320, 1999 located? How do I replace it?
I am not sure but there should be a switch by the brake pad to release the safety neutral switch to allow you to shift. Try that.
On a 1999 Mercedes CLK430, the OBD2 connector is typically located under the dashboard on the driver's side. It can be found near the steering column, often just above the brake pedal or to the left of it. You may need to remove a cover or panel to access it easily.
To replace the emergency brake light switch on a Mercedes E320, first, locate the switch under the dashboard near the emergency brake lever. Disconnect the wiring harness from the old switch, then remove it by unscrewing or unclipping it. Install the new switch by securing it in place and reconnecting the wiring harness. Finally, test the brake lights to ensure the new switch is functioning correctly.
To replace the brake switch on a Mercedes-Benz, first, disconnect the battery to ensure safety. Locate the brake switch, typically found near the brake pedal assembly; you may need to remove a panel for access. Disconnect the electrical connector from the old switch, unscrew it, and replace it with the new switch. Reconnect the electrical connector, reassemble any removed panels, and reconnect the battery to complete the installation.
To replace the brake light switch on a 1994 Mercedes C280, first disconnect the negative battery terminal to ensure safety. Locate the brake light switch, which is typically mounted on the brake pedal assembly. Remove the electrical connector and the switch by unscrewing it or releasing any clips holding it in place. Install the new switch, reconnect the electrical connector, and reattach the battery terminal before testing the brake lights.
To replace the brake light switch on a 2001 Mercedes-Benz ML55 AMG, first, disconnect the negative battery terminal to ensure safety. Locate the brake light switch, which is typically found above the brake pedal. Remove the wiring harness from the switch, then unbolt or unscrew the switch from its mounting bracket. Install the new switch by reversing the removal steps, reconnect the wiring, and reattach the battery terminal.
How do i change the 3rd brake light on a mercedes vito van.It is the brake light above the back door?
Remove the Mercedes-Benz wheel and tire. Remove the brake pad and hardware. The brake pads will come off. Reverse the process to install the new brake pads.
Brake light switch near brake pedal
Remove the tire and wheel from your 1986 Mercedes-Benz 420. Remove the brake pad spring and caliper. Reverse the process to install the new front brake pads.
bulbs or maybe your brake light switch is bad. otherwise, not sure.