Open engine compartment,on right hand side look for the thick wires from the battery. Protected with some plastic cover ,One connection on the red wire, and earth anywhere on the body of the vehicle,(not painted)which the black wire should be connected.
If u mean steering wheel controls you need a patch lead .
it is a the rear of the air intake...right at the back /top of engine..you have little room to take out two srews ....it will have a plug lead going to it. this is on a 1.6
yes u have most likely blown the radio fuse cus the radio and heater ar the same fuse
Yes but dont jump it from the battery on the transit under the boonet there is a steel eye use that to earth the jump leads then put the red jump lead on the red lead under the bonnet its like a battery lead it will have a red plastic cover on it thats where you jump a transit from do not jump directly from the battery
the battery is under the passenger seat. However, it wouldn't be recommended to have jump leads going into your car. there should be a red cover with a plus sign or it's fell off, there should be two terminals with wires going to it. Place the red lead on there and the black lead to the bonnet release catch. Make sure you have the engine switched off both cars when doing this to avoid spark. Hope this helps.
the battery is under the passenger seat. However, it wouldn't be recommended to have jump leads going into your car. there should be a red cover with a plus sign or it's fell off, there should be two terminals with wires going to it. Place the red lead on there and the black lead to the bonnet release catch. Make sure you have the engine switched off both cars when doing this to avoid spark. Hope this helps.
you can't change a lead over a jump, but if you need to land on a particular lead what you do is; as the horse bascules, put your leg on the girth firmly on the side in which you want the horse to lead from.
theres a black box under engine with a + sign on it lift it up and put red jump lead to it and the black jump lead goes to the bonnet release catch
If a spanner symbol appears on the dashboard of a Citroën Picasso, it typically indicates a need for maintenance or a service reminder. This warning could be triggered by a variety of factors, such as overdue oil changes, scheduled servicing, or other potential issues with the vehicle. It's advisable to consult the owner's manual for specific guidance and to schedule a service appointment with a qualified technician to ensure the vehicle is in good condition. Ignoring the warning could lead to more serious problems down the line.
High fuel consumption in a Citroën Picasso can be caused by several factors, including a clogged air filter, worn spark plugs, or fuel injectors that are dirty or malfunctioning. Additionally, issues with the engine's sensors, such as the oxygen sensor or mass airflow sensor, can lead to inefficient fuel usage. Regular maintenance, including timely oil changes and tire pressure checks, is crucial to ensure optimal fuel efficiency. Driving habits, such as rapid acceleration and high speeds, can also contribute to increased fuel consumption.
you need the battery first, and it needs to be in the tv remote. jump on the green button and climb on the tippy top of the tv. jump on the balloon and it will lead you to a frame jump on the following frames and jump on the shelf push the fish food
In Panfu, to jump from the volcano, you need to navigate to the volcano's peak. Once at the top, look for a specific spot or ledge that allows you to jump off. After positioning your panda correctly, you can click to jump into the lava or the area below. Be sure to explore the results of your jump, as it can lead to fun surprises or mini-games!