Cost me $185 at the dealership.
how do i replace a front crankshaft seal on a 99 mitsubishi mirage
Very carefully
No you can not. It is a solid round seal that slides over the back of the crankshaft where the fly-wheel bolts up to the crankshaft.
The part number W0133-1736436 is for a Audi RS6 crankshaft seal. The Audi RS6 crankshaft seal is sold individually. It can be purchased for a price ranging from $10 to $20.
To replace the front crankshaft seal on a 1999 Mercury Cougar V6, first disconnect the battery and remove the necessary components, such as the serpentine belt, crankshaft pulley, and timing cover. Once you have access to the crankshaft, carefully pry out the old seal using a seal puller or screwdriver. Clean the sealing surface, lubricate the new seal with oil, and gently tap it into place. Finally, reassemble the components in reverse order, ensuring everything is properly torqued.
Should pull the drive pulley and then you can pop off the old seal with a screw drive and press in the new seal.
To replace a crankshaft seal on an Infiniti G20, first, disconnect the battery and remove any components obstructing access to the crankshaft pulley. Then, remove the crankshaft pulley, and gently pry out the old seal using a seal puller. Install the new seal carefully, ensuring it's seated properly, and reassemble all components. The cost for the seal itself typically ranges from $10 to $30, but including labor, the total replacement cost can be between $150 and $300, depending on your location and the shop's rates.
Need more info like the year, make, engine size and front or rear crankshaft seal.
To replace the crankshaft seal on a Renault 1.5, first, ensure the engine is cool and disconnect the battery. Remove any components obstructing access to the crankshaft, such as the drive belt and pulley. Then, carefully pry out the old seal using a seal puller or a suitable tool, clean the sealing surface, and install the new seal, ensuring it's seated evenly. Finally, reassemble all removed parts, reconnect the battery, and check for leaks.
To replace the front crankshaft seal on a 1996 Land Rover Discovery, first, remove the drive belts and the crankshaft pulley. Then, drain the oil and remove the oil pan if necessary for better access. Use a seal puller to carefully remove the old seal, clean the area, and then install the new seal, ensuring it's seated properly. Reassemble all parts and refill the oil before starting the engine.
To replace the modified rear crankshaft seal on a 2004 Ford Explorer, first, ensure the vehicle is securely lifted and supported. Remove the transmission or transfer case to access the crankshaft. Then, clean the area around the old seal, remove it carefully, and install the new seal, ensuring it is seated evenly. Reassemble the transmission or transfer case and check for any leaks after starting the engine.
To replace the crankshaft seal on a 2007 Dodge Caliber, first, disconnect the battery and remove any components obstructing access to the crankshaft, such as the serpentine belt and harmonic balancer. Next, use a seal puller or a suitable tool to carefully remove the old seal from the engine block. Apply a thin layer of engine oil to the new seal's lip for proper installation, then press the new seal into place, ensuring it's seated evenly. Reassemble the removed components, reconnect the battery, and check for leaks.