Impact gun/wrench and a puller
take the pulley nut off the alternator....the pulley is split.....shims between the two pulley halves adjust the belt tension
Begin by removing the wiring harness from the back of your 1974 Beetle blower motor. Remove the blower motor retaining bolts. Remove the blower motor fan. Reverse the process to install your new blower motor.
Remove the line that goes to the Carb. Carefully crank the engine over and see it fuel is being pumped. Just because the pump is new doesn't mean it was installed correctly.
No.
You don't because there isn't one. Cam drive on a 1974 Bug is done through a big gear riveted to the end of the cam, that engages a gear on the crank.
To remove the speedometer from a 1974 Super Beetle, first, disconnect the negative battery cable for safety. Then, remove the dashboard cover and the screws securing the speedometer itself. Carefully disconnect the speedometer cable from the back of the speedometer, and then pull the speedometer out of the dashboard. Be sure to handle it gently to avoid damaging any components.
There are specialty tools available to make this alot easier,piston ring expanders or pliers will help remove and install rings.
To remove the dashboard on a 1974 Super Beetle, first disconnect the battery to ensure safety. Remove any screws or bolts securing the dashboard, typically found around the edges and under the instrument panel. Carefully detach any wiring connected to the dashboard components, such as the speedometer and switches. Once everything is disconnected, gently pull the dashboard away from the mounting points to complete the removal.
Yes
1600cc
165R15.
1500 rpm.