answersLogoWhite

0

If you meen the trip meter have the engine running press the right hand button at the bottom of the speedo until it goes to zero.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Where is the fuel cut off button on Peugeot 206?

The fuel cut-off button on a Peugeot 206 is typically located in the passenger compartment, often near the driver's side, close to the footwell or under the dashboard. In some models, it may also be found in the center console area. This button is designed to reset the fuel system after an accident or significant impact. Always consult the owner's manual for the exact location specific to your vehicle's model year.


Where is the fuel cut of switch on peugeot 206 hdi?

The fuel cut-off switch on a Peugeot 206 HDi is typically located in the engine compartment, near the battery or on the bulkhead. It might also be found under the dashboard on the driver's side. To access it, look for a small reset button or switch that can be pressed to reset the fuel system after a collision or if the engine fails to start. Always consult the owner's manual for precise location and instructions specific to your model year.


Hi How do you reset your speedometer on a car Peugeot 206 year 2003. Thanks?

Press and hold the reset button for a few seconds whilst the trip milometer is displayed.


How to reset a Peugeot 206 computer.?

computer's code


How do you reset a peugeot 206 alarm?

lick my shaft


How do you get rid of service spanner light peugeot 206?

To reset the service spanner light on a Peugeot 206, you need to turn on the ignition without starting the engine. Press and hold the trip reset button on the dashboard, then turn the ignition off and back on while continuing to hold the button. After a few seconds, the light should reset and turn off. Release the button, and the service light should be gone. If it persists, consult your vehicle manual or a professional for further assistance.


How do you reset the spanner symbol on the dash board of a 206 1.4hdi?

To reset the spanner symbol on the dashboard of a Peugeot 206 1.4 HDi, turn the ignition on without starting the engine. Press and hold the trip reset button on the dashboard, then turn the ignition off while continuing to hold the button. After a few seconds, turn the ignition back on, and the spanner light should reset. Release the button, and the warning light should now be gone.


Where is the fuel pump on a peugeot 206 2.0 hdi?

in the tank


After an oil change does the flashing stop light have to be reset on a Peugeot 206?

No, as far as I can see it does not.


What is a similar car to the peugeot 206?

A similar car to the Peugeot 206 is the Peugeot 205 which the Peugeot 206 is modeled after with minor modifications and upgrades from the Peugeot 205 to the Peugeot 206.


Can you fit a peugeot 207 2.0 liter HDI fuel pump to a peugeot 206 2.0 liter HDI?

no


Where is service light on Peugeot 206?

The service light is a little spanner which stays illuminated on main display on start up of the engine, this is a simple reset if home servicing and no diagnostic plug in from dealer necessary.Procedure to Reset Peugeot Service Light as follows:1. Switch the Ignition Off2. Press and hold the trip meter (mileage reset) button on the dash3. Now switch the ignition to the ON position4. Keep the button pressed for 10 seconds5. The display will read '0' and the service symbol will extinguish. Works on most models of manufacturer, for example.Peugeot106(1999 on)Peugeot 206 (1998 on)Peugeot306(1996 on)Peugeot307(1996 on)Peugeot406(1998 on)Peugeot607(2000 on)Peugeot806(1999 on)Peugeot Expert (1999 on)Peugeot 807 (2002 on)Peugeot Partner (1999 on)Peugeot Boxer (2002 on)