0
The wheel alignment specifications for a 2004 BMW X3 typically include a front camber of -0.5 to +0.5 degrees, a front caster of 7.0 to 8.0 degrees, and a front toe of 0.08 to 0.12 inches. For the rear, the camber should be around -1.0 to -1.5 degrees, with a toe of 0.08 to 0.12 inches as well. It's always best to consult the vehicle's service manual or a professional for the most accurate and specific alignment settings.
What else can I help you with?
What are the wheel alignment specs for 2007 Tundra?
The wheel alignment specs should compensate for crown in the road. The settings should be 2.54/2.73 for the caster and +.21/-.04 for the camber. The toe should be 1/16".
Does the Ford Expedition XLT require four-wheel alignment?
no Pretty sure the 04+ with independent rear suspension requires 4 wheel alignment. The older series with the solid rear axle does not.
How do you realign a steering wheel on an 04 pacifica?
Have an alignment performed by a shop that specialises in front end work.
When you rotate the tires do you have to do the wheel alignment as well?
NO! When rotating the tires, look closely at the tread. If you see any abnormal wear, such as uneven wear, feathering, or dipping. Have an alignment performed. Otherwise just rotate. Toe adjustments are common, and is the fasted tire-eating adjustment. An alignment should be checked every six months. If it's not out more than .04 by then, wait longer between alignments. The older a car gets, the faster alignments go out. A reputable place will give you a before and after print-out of your specs. And will check it for free.
Where is the fuel pressure Regulator located at on 04 BMW 325i?
Its located under the drivers side floor board and acessed under the car just behind the drivers front wheel
What are fuel pressure specs on 04 Chevy venture?
40 psi
04 dodge ram 1500 4 wheel alignment?
For a 2004 Dodge Ram 1500, a proper four-wheel alignment is essential for ensuring optimal handling, tire wear, and overall vehicle performance. It's recommended to have the alignment checked if you notice uneven tire wear, the vehicle pulling to one side, or after any suspension modifications. The alignment process involves adjusting the angles of the wheels to the manufacturer's specifications, which can improve fuel efficiency and driving stability. Regular alignments can help extend the life of your tires and enhance driving safety.
When was 'Round the Wheel created?
Round the Twist was created on 1989-04-04.
Will an 04 Ford F-250 8 lug wheel fit an 06 f250?
no they wont fit 04 is a 16 inch wheel,06 is a 17 inch wheel
How do you replace side light bulb on BMW 730?
How do I change the side/parkinglight on a bmw 530d 04 reg Do I have to take the cluster out?
When was Mabel at the Wheel created?
Mabel at the Wheel was created on 1914-04-18.
What is the wheel bolt pattern is for a 04 impala?
5x115
