It sounds like the vechile is in low range, shift back to high range. or possibly a fault with the air suspension system. maybe you have locked the air suspension in crawl mode
Air suspension fault, most likely an air bag leak. Best to look with a spray bottle of soapy water.
The system has a fault code does the dash read do not exceed 35mph should read eas fault may be a bad sensor bag pump etc you will need to take to the dealer to read and erase codes
There is a problem with the SRS. Seek out professional help. Not a DIY repair. I have a P38 Range Rover and when the drivers seat is moved the SRS switch (the yellow one)which is located under the seat is sometimes knocked which shows as a fault. If you just turn the car off and check the connection the fault is fixed
Yes but you really should take it by an authorized repair shop
it means you should connect the red wire together and the other red wire together by tieing them together. :) =)
The most common fault in any system is human error. This can range from simple mistakes to more complex issues stemming from miscommunication, inexperience, or lack of attention to detail. It is important to implement processes and checks to minimize the impact of human error.
Blameless
It means that the park distance control module has a fault in the system. It's a warning that the system is not operating properly. Most likely a fault with one of the bumber sensors.
Other words for error or misunderstanding are mistake or fault.
It is now possible to reset the EAS faut and correct the suspension problems on your own at home. I have developed tools and software that a windows PC can run. With these software and hardware tools, the Range Rover owner can reset the EAS, read the EAS faults and re-calibrate the EAS ride heights. Complete details are available at; www.RSWsolutions.com The software is called EASunlock The Hardware is called the EAS Buddy Box The Electronic Air Suspension on the 1996-2002 Range Rover is on its own communications buss. The engine management subsystem is a competely separate communications protocol and communications buss. The EAS requires a special made Serial cable and special software.
error Fault