1500 rpm.
change the TPS Throttle Position Sensor
700 rpm if you have a manual transmission, 750 rpm if you have an automatic
To adjust the idle on a 1974 Super Beetle, first ensure the engine is warm and at operating temperature. Locate the idle adjustment screw on the carburetor, typically found on the side of the carb. Turn the screw clockwise to increase the idle speed and counterclockwise to decrease it, checking the RPM using a tachometer if available. Finally, make small adjustments and listen for a smooth, stable idle before securing any adjustments.
1500 rpm.
To set the idle on a 1979 Super Beetle, first ensure the engine is warm and at operating temperature. Locate the idle adjustment screw on the carburetor; turning it clockwise increases the idle speed, while counterclockwise decreases it. Adjust the screw until the engine idles smoothly, typically between 850 to 950 RPM. Lastly, check the timing and make any necessary adjustments for optimal performance.
Does not have one. Idle speed is controlled electronically through an idle speed control module.
Idle speed is PCM controlled and is not adjustable.Idle speed is PCM controlled and is not adjustable.
Idle speed is computer controlled and is not adjustable.Idle speed is computer controlled and is not adjustable.
how to adjust idle on 2001 legacy
If it has EFI (Electronic Fuel Injection) there is no idle speed adjustment. The idle speed is adjusted electronically.
Idle speed is computer controlled and is not adjustable.Idle speed is computer controlled and is not adjustable.
A general number for timing is around 10 but that can change based on the engine setup. The idle speed also depends on the set up but its about 900-1000 and 700-800 in gear with a stock engine.