look inside the door for the gas filler.
30
30
To inflate a bike tire using a bike tire compressor, first attach the compressor nozzle to the valve on the tire. Turn on the compressor and inflate the tire to the recommended pressure level indicated on the tire sidewall. Once the tire is properly inflated, remove the nozzle and securely close the valve.
To use an air compressor for bike tires effectively, first, ensure the compressor is set to the correct pressure level for your bike tires. Next, attach the compressor nozzle to the valve on the tire. Turn on the compressor and fill the tire with air until it reaches the recommended pressure. Finally, remove the nozzle and check the tire pressure with a gauge to ensure it is correct.
Look on the tire. It will be printed on the rubber right where it meets the rim. You can also look in the drivers door panel. That will give you recommended tire pressure also. Never exceed the recommended tire pressure that is on the tire.
Tire pressure is posted on the door jamb (driver door). Mine says 32psi.
To fill a tubeless tire, first remove the valve cap and attach an air compressor or tire inflator to the valve stem. Turn on the compressor and fill the tire with the recommended air pressure. Check the pressure with a tire gauge and adjust as needed. Finally, replace the valve cap and ensure it is securely tightened.
Its the one that is stated on the owners manual...
The recommended pressure for the tyre... will be embossed on the tyre wall ! It's moulded there during the forming process !
32 PSI is usuially enough.
32 psi front and ack
Check the sticker on the edge of the driver's door.