0
first id check the fuse if that's ok there should be a switch at the top of the brake pedal so when u press the brake the switch opens and brake lights work this is adjustable and may need adjusting failing that it could need replacing.Also be sure all of your brake light bulbs are not burned out. This can happen with any car (and happens fairly often).
What else can I help you with?
Your Audi a3 brake lights don't work?
If your Audi A3 brake lights aren't working, first check the brake light bulbs to see if they need replacing. Next, inspect the brake light switch, usually located near the brake pedal, as it may be faulty or misaligned. Additionally, examine the fuses related to the lighting system for any blown fuses. If these steps don't resolve the issue, it may be necessary to consult a professional mechanic for further diagnosis.
Why do your brake lights work but your tail lights don't on my 1995 Audi a4?
They are two seperate circuits. Check the fuses and the bulbs.
Break lights continously on Audi?
Just check your brake lite switch which is located at the brake pedal the switch might be broken that is why your brake lite is always on.
Audi A6 signal lights stay on all the time any ideas why?
Signal lights staying on withot flashing indicates either front or rear signal bulb not working on the Audi
What could be the Cause of fog lights not working on a 2001 Audi A4 Quattro?
Bulbs burned out?
Audi A6 automatic wont go into gear engine starts but had a lot of trouble getting key out help?
sound silly but make sure your brake lights are all working ive had this problem before its some sort of safety feature
What does the two circles mean on the dash computer of an Audi?
It's an yellow warning indicator lamp. It lights when brake pads are weared. Now it's time to replace the used brake pads!
Audi a4 parking lights not working?
Turn your indicator switch to left/right and the parking light will come on for that side.
How do you fix brake lights coming on after car locked on a 05 Audi A4?
ensure that the indicator stalk is set in the middle when you turn off the ignition.
Audi tt break and fluid warning light come on when peddle is pressed?
If the brake and fluid warning lights come on in your Audi TT when the brake pedal is pressed, it may indicate a problem with the brake fluid level or a potential issue with the braking system itself, such as worn brake pads or a malfunctioning sensor. Check the brake fluid reservoir to ensure it is at the proper level, and inspect for any leaks. If the fluid level is adequate and the problem persists, it’s advisable to have the vehicle inspected by a qualified mechanic to ensure safe operation. Ignoring these warning lights could lead to serious brake failure.
How do you change the brake light switch on an Audi A3?
To change the brake light switch on an Audi A3, first disconnect the vehicle's battery to ensure safety. Locate the brake light switch, which is typically positioned above the brake pedal. Remove the old switch by disconnecting the wiring harness and unscrewing it from its mount, then install the new switch by reversing the process. Finally, reconnect the battery and test the brake lights to ensure they function correctly.
Can you put 2009 a5 Audi lights in a 1999 Audi a6?
no.
