it is the relay, change it, it is the hazard button, the one with the red triangle.
this car may have separate flashers for the turn signals and the emergency flashers
There are two relays, one for the emergency flashers, and one for the turn signals. Your turn signal flasher is defective and needs replacing.
Turn the emergency flashers on and make sure that they are flashing at a normal rate of speed. Then turn your emergency flashers off and try one of your turn signals and it should work.
The turn signals on a 91 caprice do not work, the emergency flashers do.
Yep, one for the signals and one for the emergency flashers.
No, there is only one flasher which works both the turn signals and emergency flasher. It is located on the drivers side, under the dash, above fuse block, mounted on kick panel.
If your turn signal flashers stopped working, play with the emergency flasher button on top of the steering column. Our 97 Sable turn signals quit once and luckily I pushed the emergency flasher button in and out many times and the signals have worked ever since. But the emergency flashers don't work, but I can live with that.
It has one flasher that controls both the turn signals and the emergency flashers. If the turn signals are working then the flasher is not your problem. However the flasher relay is located on the drivers side, under the dash, above the fuse block, mounted on the kick panel.
it is behind the glove box.
You have to quickly flip the turn signals back and forth in order to simulate an emergency flasher.
The flasher is located under the dash near the drivers side kick panel. There are two flashers, one for turn signals, one for emergency flashers.
If the turn signals and emergency signals don't workout sounds like an electrical problem's would suggest that you take it into the closest shop to get the problem diagnosed properly.