answersLogoWhite

0

Faulty sensor, or oil pressure issue. Sell the car, you'll replace your oil pan gasket at least twice.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Why does check engine light blinks 9 times?

It is important to know why a Check engine light blinks. In many cars, when it blinks so many times, it is indicating a code, which is indicating the problem number for the specific car.


Check engine light comes on and it blinks no power on a f150?

If your check engine light is blinking with the engine running that is indicating a misfire - get your vehicle scanned for any trouble codes to diagnose and then repair the problem


What could be wrong if the check engine light blinks?

get it checked, because if the ligt blinks, something is wrong.


What does it mean if check power light comes on and loss of power.?

The check power light on a vehicle is a warning indicator. A common cause of this is a improperly charged battery.


What do i check when my jeep has a horibble idle and the check engine light comes on for a day or two then goes off for a week then comes back on and so forth it never blinks any ideas?

There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.


What does the can with a drip coming from it mean on the indicator lights on a 02 Mercedes ml320?

The can with a drip is the oil indicator. If the light comes on, check the oil level (well, you should check the oil at least once a week).


S lite flashing on 91 Honda accord?

The S light blinks to inform you of a malfunction picked up by the TCU. When the A/T control unit senses an abnormality in the input or output systems, the (S) indicator light in the gauge assembly will blink. However, when the Service Check Connector (located to the lower right of the glove compartment) is connected with a jumper wire, the (S) indicator light will blink the problem code when the ignition switch is turned on. When the (S) indicator light is on, connect the two terminals of the Service Check Connector together. Then turn on the ignition switch and observe the (S) indicator light.Problem codes 1 through 9 are indicated by individual short blinks, Problem codes 10 through 15 are indicated by a series of long and short blinks. One long blink equals 10 short blinks. Add the long and short blinks together to determine the problem code.I hope this helps and good luck, if you are not a hands on person you can take the car to your local Honda dealer but it may cost you a lil more dough WEBSITE WITH DIAGRAM http://autorepair.about.com/library/faqs/bl189f.htm The S light blinks to inform you of a malfunction picked up by the TCU. When the A/T control unit senses an abnormality in the input or output systems, the (S) indicator light in the gauge assembly will blink. However, when the Service Check Connector (located to the lower right of the glove compartment) is connected with a jumper wire, the (S) indicator light will blink the problem code when the ignition switch is turned on. When the (S) indicator light is on, connect the two terminals of the Service Check Connector together. Then turn on the ignition switch and observe the (S) indicator light.Problem codes 1 through 9 are indicated by individual short blinks, Problem codes 10 through 15 are indicated by a series of long and short blinks. One long blink equals 10 short blinks. Add the long and short blinks together to determine the problem code.I hope this helps and good luck, if you are not a hands on person you can take the car to your local Honda dealer but it may cost you a lil more dough WEBSITE WITH DIAGRAM: autorepair.about.com/library/faqs/bl189f.htm


How much fuel is left when the fuel indicator light comes on?

depending on what your driving one eighth of a tank is left in the tank when your indicator light comes on


2003 Mercury Mountaineer check engine light and overdrive light?

my check engine light stays on and the o/d light blinks....what could this mean?


What does it means when your serviceengine light blinks and than stop blinking?

My light usually blinks when I start the car and then stops later on, I usually take it in when the light is solid. You should check your owner's manual if you are concerned.


What does is mean when a 1999 Passat check engine light blinks?

you should check your engine...like now...


What does it mean when the Malfunction indicator light comes on in a 2002 jeep liberty sport?

what to do when the malfuction light comes on?