On my car 99 corolla it was located on the driver side of the engine just visible from the top between two coolant hoses. I only had to remove the air filter housing to get to it, not the exhaust manifold as directed by my local parts store and some other directions I have seen online. Caution, coolant will leak if you haven't drained it. Make sure you get the air bubbles out of the coolant if you decide to make a quick switch of the sensor without draining the fluid.
Somewhere under the hood!
where is coolant tempreture senser in 1999 corolla
how much engine coolant dosee a 2000 toyota corolla hold
The coolant temperature sensor on a 2001 Toyota RAV4 is located on the exhaust manifold. It is on the driver's side of the manifold.
The 2006 Toyota coolant temperature sensor is located on the front of the engine. The coolant temperature sensor will be a few inches above the thermostat housing.
The termostat housing
Your 1999 Toyota Corolla can use any SAE certified anti-freeze coolant. The anti-freeze coolant can be mixed half-and-half with water.
where is the fuel pump relay located on a 2000 toyota corolla
in the radiator, some in the engine and some in the reservoir
Where is the brake fluid filler located on a 2004 Toyota Corolla?
where is canister locate on 1998 toyota corolla
There are three coolant sensors installed to a 1989 Toyota Corolla 1.6 GL. One is a thermostatic valve switch that controls vacuum lines and is located near the passenger side of the carburetor and below the intake manifold. This can be identified by the hoses connected to it. The two other coolant sensors are located immediately before the big water hose leading to the radiator (upper hose). These two sensors can be identified by their electrical connectors. The bigger terminal is connected to a relay that controls the operation of the radiator fan. The smaller terminal is connected to the temperature gauge at the instrument panel.