Left of steering wheel on knee kick panel, or just below light switch on lowest part of dash panel, a little door opens.
RecessionProof-Business.com
The 1999 Honda CR-V OBD 2 port is under passenger dash
The 1999 Chevrolet Camaro OBD 2 port is under driver side dash above accelerator pedal
The 1999 Ford Contour OBD 2 port is under driver side dash next to kick panel
The 1999 Toyota Tacoma OBD 2 port is on lower edge of dash; next to console; connector faces down
The OBD II connector on the 1999 Eclipse RS is under the dash to the right of the steering column next to the center console. it points downward.
The OBD connector is under the dash on the driver side.
The 1999 Honda Accord OBD 2 port is above hood release; connector faces down
The OBD connector is under the dash on the driver side
obd 2
1988 is OBD 1 not 2. The connector is under the hood, next to the battery.1988 is OBD 1 not 2. The connector is under the hood, next to the battery.
The obd II connector is under the dash on the driver side.The obd II connector is under the dash on the driver side.
To retrieve the diagnostic trouble codes (DTCs) from a 1998 BMW 528i, you'll need an OBD-II scanner compatible with BMW or the proprietary BMW diagnostic tool. Once connected, you can read the codes by following the prompts on the scanner. To reset the codes, you can either clear them using the scanner or disconnect the car’s battery for about 15 minutes. However, be aware that disconnecting the battery may also reset other systems and settings in the vehicle.