Looking face on to the engine, there is a plastic cover just below the windscreen on the left. The cover is lifted by pressing two clips in. The brake fluid reservoir can be found here.
The level of the fluid is critical. get it done by somebody who is familiar with automatics.
Pry the the unit holding bulbs away from the car by squeezing and levering from the top.
115 or 131 according to the type and year of production
To replace the brake pads on a Rover 75, first, safely lift the vehicle and remove the wheel. Next, use a brake caliper tool to compress the caliper piston, then unbolt the caliper and remove it from the rotor. Take out the old brake pads and replace them with new ones, ensuring they are properly aligned. Finally, reattach the caliper, replace the wheel, and lower the vehicle before testing the brakes.
£75+ = cost of one hours labour + fluid
To bleed the clutch of a Rover 75, first remove the interior panels on the steering column. Second, remove the master cylinder and use a syringe to inject the fluid into the system and repeat 4 times to bleed the clutch.
How do i time rover 75 v6 engine/
To remove the guide pins on Rover 75 brake calipers, you typically need a 7mm Allen key. It's important to ensure that you have the correct size to avoid stripping the pins. Always check for any specific requirements based on the model year, as variations may exist.
Rover 75 Under bonnet fuel pump - WQB100482 - Roughly £180 Rover 75 Under bonnet fuel pump - WQB100482 - Roughly £180
Hi just doing my rear discs and it needs a T50 to remove the screw, hope that helps
yes
in my opinion yes, i got my 75 rover a while back and it still works perfectly