Depending on the spark plug manufacturer, the plugs for a 1988 Mercedes 190E 2.3 should be gapped between .030" to .032". Bosch and Denso recommend .032", while NGK recommends .030".
A Mercedes 190e doesn't have a carburetor. They are fuel injected.
oil filter on a Mercedes 190E 1986 is in the back of engine
Gaps are from .028" thou to 0.035" thou. Preference is for 0.028" thou.
== ==
No they will not.
To plug in a diagnostic reader on a 2001 SLK 320 Mercedes, you need to locate the OBD-II port, which is typically found under the dashboard on the driver's side. Look for a small, rectangular connector near the steering column, usually just above the pedals. Once you find it, you can connect your diagnostic reader to access the vehicle's diagnostic information.
A Mercedes-Benz 190e has a curb weight of approximately 3000 pounds. This varies by the year and configuration of the vehicle.
To remove the spark plug wire in 190e one needs a long nosed plier. Next go for the metal part just above the plugs and grip them tightly and pull up. To fix it all you need to do is to push it with your fingers. Done
10'5"
There is no filter:)
Under the hood on the passenger side near the firewall there is a round plastig plug that has a plastic teather to keep from being lost. Pick up the plug and the diagnostic port is underneath.