Only the 944S's used an actual ignition control module, and it was located on the fender under the coolant expansion tank. The other 944's and 924S's used the signals from the referance sensors to the DME and the DME controlled everything. The DME's are located: 82-85 - under the steering wheel. 85.5-91 under passengers kickpanel, pull back carpet (it's velcro'd in under the dash at the / ) remove 4 screws to remove the wood panel, remove 4 plastic screws to remove the metal piece that holds the DME in.
The PCM (powertrain control module) is located on the passenger side of the fire wall.
where is the ignition relay on a 1994 280 sl
My guess would be, Ignition Control Unit.
The arithmentic logic unit (ALU) and the control unit are located inside the central processing unit (CPU).
a control unit works by this other thing that makes it work but it also saves things.
CPU
The electronic ignition control module on an automobile is installed by first locating the unit at the top of the engine. The wiring harness is then disconnected from the original unit an a new module put in its place.
don't know about the particular year. on my 95 F250, the ICM is located on the driver's inside fenderwell, underneath the Powertrain Control Module. hope that helps.
there is no part called an "ignition controller". one part is called the ignition control module or "power stage" which is on the left side inside fender wall partially hidden by the air cleaner, the other part is called the ecu, electronic control unit or computer and it is under the dash above the accelerator pedal.
Regarding a model 1997,2 liter sonata, there is not an ignition control module as such. Ignition control comes from the ECM (ELECTRONIC CONTROL UNIT) through the Ignition Power Transistor (often called Igniter) and then to the Ignition coil.I do not have any information on the 1.8 or the 3.0 liter models.
Answer: Control unit is a computerized part of the speech processor. Most of the controls, such as program, volume and sensitivity, are located on the control unit.
Bosch 0 227 100 018