my best guess would be in your fuse box under the engine, not in the one in car, the switches are bigger.
The turn indicator relay in an Audi TT is integrated with the hazard switch. To replace the relay you would need to replace the hazard switch.
The AC clutch relay switch for a 1998 Audi A6 Quattro is typically located in the relay panel, which is usually found in the engine compartment or under the dashboard on the driver's side. To access it, you may need to remove a cover or panel. It's advisable to consult the vehicle's service manual for the exact location and identification of the relay.
best way to test a relay is remove it from board, get a 9v square battery and touch the switching terminals on the relay, the relay should click if its working. You can then test resistance through the relay. You can also check the feed to the relay, if theres pwer to the switching terminals on the relay, chances are the switch it ok. If no voltage, switch or wiring.
Where is the electric radiator fan relay switch for a 2001 Audi A6 2.7t
The indicator relay switch on an Audi TT is typically located within the fuse box. In many models, the fuse box can be found under the dashboard on the driver's side or in the engine compartment. You may need to consult the owner's manual for the exact location and specific diagram for your model year. If you're having trouble, a professional mechanic can assist in locating and replacing the relay.
For the Audi A4 1.9 TDI Avant Quattro, the fuel relay wiring diagram typically includes connections for the relay coil and the switch terminals. The relay coil usually connects to the engine control unit (ECU) for activation and ground, while the switch terminals connect to the fuel pump and power source. It's essential to refer to a specific repair manual or wiring diagram specific to your vehicle's model year for accurate pin configurations and color codes. Always ensure safety precautions when working on vehicle electrical systems.
its the hazard switch, its all one unit
2002 Audi quattro 1.8 ignition module location
To change the relay switch for the turn signal hazard flashers on a 2001 Audi A4 1.8T, first locate the relay, which is typically found in the fuse box under the dashboard or in the engine compartment. Remove the cover and identify the relay by consulting the diagram on the fuse box cover or your owner’s manual. Carefully pull the old relay out of its socket and replace it with a new one, ensuring it is securely seated. Finally, test the turn signals and hazard lights to confirm they are functioning properly.
It's built into the hazard light switch. The hazard light button will slide out, with the relay (small box) attached.
An Audi A4 1999 hasn't a relay switch. There are control modules located at each door instead. If windows or doors need repair examine fuses first.Ê
My research to date finds that the turn signals and hazard signals are controlled by a common relay. That relay is behind the hazard relay switch. My 2002 Audi A6 has the same symptoms you describe, and I will be removing the hazard switch to get at the relay for replacement. Good luck.