That Could be 1 of 2 things, ABS module or ABS wheel sensor. If it comes on when you start moving, it is most likely the ABS wheel sensor. If it does it all the time, most likely ABS module.
THERE IS A SENSOR ON THE FRONT AND REAR BRAKE PADS ITS TIME TO HAVE YOUR BRAKES SERVICED
How do you reset dashboard brake light on vw passat
brake light flashing on 2002 jetta tdi
Flashing means that the car is misfiring. Driving it like that could damage the catalytic converter.
Is it flashing or staying on? Flashing while stationary / start up - some sort of fault. Probably with braking / traction control. Flashing occasionally while on move - car skidding losing traction Staying on: Fault with traction control - I had this happen to me car would start, no light on, after a while light on all the time - turned out it was a broken wire. Staying on after pressing a button marked ESP you just switched off the Traction Control.
My 1995 Passat's oil light flashes when I'm low on oil and go around a corner. It kinda depends what light is flashing.
A GFCI outlet flashing a red light indicates a fault in the electrical circuit, potentially due to a ground fault or a wiring issue. It is a safety feature to alert you to the problem and prevent electrical hazards.
The red " BRAKE " light in your dash comes on if the parking brake / emergency brake is on and also if the BRAKE FLUID LEVEL in the brake master cylinder located in your engine compartment is LOW
Well what do you know I solved the mystery mmyself it turns out after I paid to replace wheel cylinders and hoses and bleeding the brakes the cure was an $8.00 brake switch. Once I changed the switch the flashing brake light monster went away. So to anyone else who has a flashing brake light problem with your 89 Chevy S10 Blazer if you get a code 10 that is when the brake warning light flashes 10 times the fix is a new brake switch hope this helps someone.
This light is trying to tell you that your brake fluid may be low. Check your brake fluid and fill if it needs it.
It could be the brake light switch, usually mounted on the brake pedal.
The red light on your GFCI outlet is flashing to indicate a fault or malfunction in the electrical circuit. This could be due to a ground fault, overloading, or a wiring issue. It is important to address this promptly to ensure electrical safety in your home.