Check your master brake cylinder, as the warning light will come on if the fluid level is low. If that is OK, you probably need to change your brake pads.
A bad coolant temperature sensor is one thing that could cause an idling speed problem with a Peugeot 406. There could also be a problem with the idle control valve.
The "Check Handbrake" warning in your Renault Laguna usually indicates an issue with the handbrake system, which could be due to low brake fluid, a malfunctioning brake switch, or a problem with the handbrake itself. First, ensure that the handbrake is fully released and check the brake fluid level. If the warning persists, it's advisable to have the vehicle inspected by a qualified mechanic to diagnose and resolve the issue safely.
When the handbrake and stop light on a Renault Clio come on, it typically indicates that the handbrake is engaged or not fully released. Additionally, it could signal an issue with the brake system, such as low brake fluid levels or a problem with the brake components. It's important to check both the handbrake and brake fluid levels, and if the warning persists, to consult a mechanic for further inspection.
I have a problem with my Peugeot 306 deasel pump its not idling
i had the same problem last month and i had find out that it was because the brake oil was running low.
If that is the only problem, then yes.
get a new dial cluster from eBay it a peugeot problem
There are several offers of Peugeot cars on Ebay, specifically in the cars section. Definitely you can offer or buy a Peugeot on Ebay without any problem.
To tighten the handbrake on a W-reg Vauxhall Vectra, first, locate the handbrake adjustment nut under the center console or between the front seats. Use a suitable tool, usually a socket or a wrench, to turn the nut clockwise until you achieve the desired tension. Make sure to check the handbrake effectiveness by testing it after adjusting. If the problem persists, inspect the rear brake components for wear or damage.
If an immobilizer light on a 2005 Peugeot Boxer will not go out it indicates a problem with the wiring. The immobilizer can be by-passed until the wiring can be checked.
If you clock does not work in your Peugeot 206 when the stereo is plugged in, check the clock fuse. You should also ensure you do not have a wiring problem.
No idea but I have the same problem with mine !