0
What else can I help you with?
How do you change fuel filter on Peugeot 806 diesel?
How do you change fuel filter on peugeot 806 diesel?
You have changed the fuel sender on your peugeot 106 diesel the fuel gauge is stuck in one place please can anyone help you?
check for obstructions in tank interfering with sending unit
Peugeot 205 will not turn off?
If its a Diesel, its probably the Diesel Stop switch. Located on the Diesel Fuel Pump.
What could cause a faulty fuel gauge on a Peugeot?
check ground on fuel tank
Where is the thermostat on a Peugeot 1.9 diesel?
Under the fuel filter housing
How do you change fuel filter peugeot 106 diesel?
how do you take clips off
How many miles will i get in my peugeot 1.9 306 diesel when the fuel light is on?
According to my manual, the fuel light goes on when the tank is down to approx 6 litres of diesel.
What is the arrow on the fuel gauge?
The arrow is there to show the level of petrol or diesel that is in the vehicle's fuel tank.
How can I determine whether a car runs on petrol or diesel?
To determine if a car runs on petrol or diesel, you can check the fuel cap or the fuel gauge. The fuel cap may have a label indicating the type of fuel required, while the fuel gauge may have a symbol for petrol or diesel. Additionally, you can consult the owner's manual or contact the manufacturer for confirmation.
How do you drain a peugeot 306 diesel tank?
To drain the diesel tank of a Peugeot 306, first ensure the vehicle is on a level surface and the engine is off. Disconnect the fuel filler cap and locate the fuel drain screw, typically found at the bottom of the tank or near the fuel pump. Place a suitable container underneath, then open the drain screw to let the diesel flow out. Be cautious to avoid spills, as diesel fuel is flammable and should be disposed of properly.
Where is the petrol filter in Peugeot 207?
Peugeot 207 fuel filter locations. The fuel filter on petrol models is located underneath the vehicle near the fuel tank. On diesel models the filter is under the bonnet on top of the engine.
How do you test the primary fuel pump on a Peugeot 406 HDI diesel engine?
To test the primary fuel pump on a Peugeot 406 HDI diesel engine, first ensure the ignition is turned off and disconnect the fuel supply line from the pump. Then, turn the ignition on (without starting the engine) to activate the pump and check for fuel flow from the pump outlet. If fuel is flowing, verify the pressure using a pressure gauge; it should meet the specified range for the engine. If there's no flow or inadequate pressure, the pump may need to be replaced.
