hi there. i have myself an xk8, 4l -97 model. from my experience if the Valet mode is activated is possible that the button wont work , to prevent the valet to open the trunk. to over run the valet mode, use the ignition key to open the trunk.
regards
cr4zy_jaguar
There is a button in the glove compartment that disables the remote releases for the trunk. I would check there first.
NO, only button it has is on remote and manual open on trunk door, when car is unlocked.
There is no remote trunk release. You must get out and open it using the handle.
THE TRUNK RELEASE BUTTON IS ON THE REMOTE IF YOU HAVE POWER LOCK AND KEYLESS ENTRY. THERE IS NO TRUNK RELEASE INSIDE OF THE FOCUS
== == The lock solenoid switch is not working properly to retract the lock arm in the trunk.
The power trunk lid has to be activated by pushing the trunk release button on the remote twice. to close the trunk,, do like wise.
You use the release button on the dash, or the keyless remote to open,
There isn't a release button inside the car. Just push on the key hole button on the truck to release. If this doesn't work your trunk is locked. Use the remote to unlock - press twice. paW
The remote trunk release was optional. If it is there, you will find a yellow button inside the glove box.
To open the trunk of a 2006 Chevrolet HHR, you can use the trunk release button located on the driver's side door, or you can press the trunk release button on the key fob if your vehicle is equipped with remote access. Alternatively, you can unlock the trunk manually by inserting the key into the trunk lock. If the vehicle is equipped with a rear hatch release inside the car, simply press that button to open the trunk as well.
To open the trunk of a Jaguar S-Type, you can use the key fob by pressing the trunk release button, typically denoted by a trunk icon. Alternatively, you can unlock the car with the key or remote and then pull the trunk release lever located near the driver's seat. If the car is unlocked, you can also press the trunk lid. If the electronic release isn't working, you can manually open the trunk using the key.
On the driver's door, push and hold the DOOR UNLOCK button until you hear the trunk lid release.