answersLogoWhite

0

AnswerThe bulbs for the brake lights are usually separate from the normal tail light bulbs.

Check and replace the brake bulbs first, and if they are still not working examine the fuses, switch and wiring.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

My brake lights or turn signals don't work on my Cadillac deville?

How do you replace brake lights


Brake lights work but when turn signal is on both brake lights go out?

Check and make sure you have the correct bulb. The turn signal/brake light is a dual element bulb and if you have a single element it does not work properly.


Why would brake lights not work on 2002 Chevy Suburban when fuse switch and bulbs are good?

No brake lights but turn signals work? Turn signal switch brakes route through it.


What causes your tail lights and parking lights not to work but turn signals headlights and brake lights work?

Fuse, wiring, bulbs


What would make your brake lights not work?

The most likely cause is a bad brake light switch (if none of the brake lights illuminate) but if its only one of the brake lights, try changing the bulb. Even if they still work as running or turn lights because they have a double filament and may still work partially, but not as brake lights.


What could cause a 99 Chevy Malibu's left tail lights not to work but brake-turn do?

To be more specific, the ground wire must work and the bulbs, fuses, etc.. Or the back up lights and turn signals and brake lights wouldn't work? Right? Could it be the back panel...and still let the brake/turn/backup lights work? I need help fast. Thanks!


All lights work except the brake lights and 4 ways you replaced the brake switch and flasher still nothing Is there a relay or something I are missing?

The turn signal switch overrides the brake light circuit while the turn signals are on. If the switch is damaged or worn out the brake lights won't work.


What if your brake lights work but not the tail lights?

Look for a fuse labeled TAIL LIGHTS. There are 2 separate circuits, one for brake turn and flasher and the other is for tail lights.


Why do the brake lights work but not the parking lamps on a 1990 mustang and the dash lights do not work too but the turn signal lights on the dash work.?

Check the fuses.


What causes the tail lights not to work on a 1995 Chevy Tahoe when the turn signal and brake lights do work?

either dimmer switch or blown fuse If you are saying that the tail brake lights are working but the third brake light is not....It may be a defective turn signal switch in the steering column.


What fuse controls the brake lights on a 92 Dodge Dakota. All lights and turn signals work except no brake lights when brake pedal is pushed?

Fuse 7 controls the brake lights. It should be a red 10amp fuse.


Why would the brake lights tail lights and turn signals not work on your 1985 Volvo 240 if emergency flashers are operational and fuses and bulbs are good?

I am having the same trouble. My brake lights work with the light switch for nighttime driving, but only far right brake light works when i pres brake pedal. Reverse lights dont work at all. Turn signals and hazard light work.