answersLogoWhite

0

Sorry, there isn't a nice answer to this Q. The best I can offer is: If the toilets plugged, call a plumber. If your more adventuristic here's what you can do: First thing is locate the water supply valve between the toilet tank and the wall or floor. Be ready to turn it off quick. Practice turning it off BEFORE the next step and you find out it won't turn. Flush the toilet. If it flushes ok, you can try some toilet paper to see if it goes down ok. If so, the bottle may have gone on down the drain. Next is: Put on gloves and reach into the toilet and feel for the bottle. Extract it if you can. Toilets have what's called a "Gooseneck" right behind the hole you can see. It's is shaped like an "S" so unless you want your neighbors to see the Fire Dept. pull your arm out of your toilet, DON'T STICK YOUR ARM IN AND GET IT STUCK! DON'T REACH ANY FARTHER IN THAN YOUR WRIST TO FEEL FOR THE BOTTLE. Extract it if it's there. Now comes the nasty part. You will need to remove the toilet to access the back side of the Gooseneck and the drain. There is a valve with a hose connected to it and the toilet tank on the side of the toilet. This is the water supply to the toilet. Turn it off. FLush the toilet holding down the lever to get as much water as you can get out of the tank. Remove the tank top. Use a rag and bucket to sop up the remaining water from inside the toilet tank and bowl. On the base on each side there is a 7/16 nut. Remove these. Get some newspaper or disposable drop cloth and spread it near the toilet. Now you have to lift the toilet off the holdown bolts and drain and set it aside. CAUTION: IT WILL BE HEAVY AND AWKWARD!! Now you'll see why you want to get as much water out as possible. When the toilet is removed you will be able to see directly down the drain and by tilting the toilet on it's side you will be able to see the other side of the Gooseneck. You may be able to remove the bottle now. If there is no standing water in the drain and you can't find the bottle it probably went on down the drain. If there is standing water in the pipe now is a good time to call that plumber. It gets more complicated and nasty from here.The good news is you have saved on labor cost by removing the toilet. You can also save on cost by re-installing the toilet. Be sure and clean the base of the toilet and drain face and use a new wax gasket and bolts. Good Luck.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

How can I effectively incorporate potty training toilet paper into my child's toilet training routine?

To effectively incorporate potty training toilet paper into your child's toilet training routine, start by teaching them how to properly use it during bathroom trips. Show them how to tear off the right amount, wipe themselves gently, and dispose of the used paper in the toilet. Encourage them to practice these steps consistently and provide positive reinforcement for their efforts. Gradually, they will learn to use toilet paper independently as part of their potty training routine.


How can I help my 5-year-old who will only poop in a diaper transition to using the toilet?

To help your 5-year-old transition from using a diaper to using the toilet for pooping, you can try these steps: Encourage your child to sit on the toilet regularly, especially after meals. Offer positive reinforcement and rewards for using the toilet. Make the bathroom a comfortable and inviting space for your child. Be patient and understanding, as this transition may take time. Consult with a pediatrician or child psychologist for additional guidance if needed.


What are the steps involved in installing a toilet replacement kit?

The steps involved in installing a toilet replacement kit typically include shutting off the water supply, removing the old toilet parts, installing the new parts according to the instructions, and testing the toilet for leaks.


Can you replace the tank on a toilet?

Yes, you can replace the tank on a toilet by following the proper steps and using the right tools.


Everyday Items That Are Used In Space?

a toilet steps a helmetCOME ON THINK OF IT


What are the steps to properly use a toilet flange repair kit for fixing a damaged toilet flange?

To properly use a toilet flange repair kit for fixing a damaged toilet flange, follow these steps: Turn off the water supply to the toilet. Remove the toilet and clean the area around the damaged flange. Install the new flange over the damaged area, ensuring it is securely in place. Use the provided screws to secure the flange to the floor. Replace the wax ring and reattach the toilet to the flange. Turn the water supply back on and test for leaks. These steps will help you effectively repair a damaged toilet flange using a repair kit.


What are the essential steps for a proper toilet setup in a new bathroom?

The essential steps for a proper toilet setup in a new bathroom include: Ensuring proper placement of the toilet in relation to the plumbing lines and available space. Securing the toilet to the floor using bolts and a wax ring for a watertight seal. Connecting the water supply line to the toilet tank and checking for leaks. Installing a toilet seat and lid for comfort and hygiene. Testing the toilet for proper flushing and functionality before regular use.


How many steps to make a mile?

456 adult steps or 550 child steps


How can I fix toilet leaks at the base?

To fix toilet leaks at the base, you can try tightening the bolts at the base of the toilet, replacing the wax ring, or checking for cracks in the toilet base. If these steps don't work, you may need to call a plumber for further assistance.


How can I securely attach a toilet seat fastener to my toilet seat?

To securely attach a toilet seat fastener to your toilet seat, follow these steps: Place the fastener on the underside of the toilet seat. Align the holes on the fastener with the holes on the toilet seat. Insert the bolts through the holes and tighten them with a screwdriver. Make sure the fastener is securely attached before using the toilet seat.


What are the steps to install a new toilet flapper in a toilet tank?

To install a new toilet flapper in a toilet tank, first turn off the water supply to the toilet. Flush the toilet to empty the tank. Remove the old flapper by disconnecting it from the flush valve. Install the new flapper by attaching it to the flush valve. Turn the water supply back on and test the new flapper by flushing the toilet.


What are the steps in naming a child?

well in my opinion there arent really any steps into naming a child just pick a name that you and your partner like.