It is not recommended to eat fish from a pond containing copper sulfate, but if care is given it is not harmful. Humans can safely consume small amounts of copper, but in large amounts it can cause health problems.
The amount of copper sulfate needed to clear water in a concrete pond depends on the size of the pond and the level of clarity desired. A general guideline is to use 0.5-1.0 ppm (parts per million) of copper sulfate for controlling algae in ponds. However, it is important to follow manufacturer recommendations and consider the specific conditions of the pond to prevent over-treatment and potential harm to aquatic life.
When copper sulfate is applied at the PROPER rates and proportionsthe water is supposed to be safe immediately for swimming. However, it does have an unpleasant smell, so waiting for at least 12 hours is advisable.
If it is in very dilute quantities then it shouldn't be. However copper sulphate is listed as a halmful substance and a possible irritant, so it is not something you want your livestock to be injesting
If it is in very dilute quantities then it shouldn't be. However copper sulphate is listed as a halmful substance and a possible irritant, so it is not something you want your livestock to be injesting
The most effective koi pond algaecide for controlling algae growth is one that contains active ingredients like copper sulfate or algaecide chemicals specifically designed for ponds. It is important to follow the manufacturer's instructions carefully to ensure safe and effective use.
Copper is known to have algicidal properties that can inhibit algae growth in ponds. Placing copper pennies in a pond may help to control algae to some extent, but it may not be a sustainable or effective long-term solution for algae management. It's important to consider the potential environmental impact of introducing copper into the pond ecosystem.
a puddle
pond is small and a swamp is big.
Pond Shrimp can be less than an inch
First of all I'm not a pool expert, but I've owned a pool for a bought 25 yrs. I live in Ohio and I have a 20,000 gallon vinyl liner pool with a sand filter system. First thing you need to do is make sure your alkalinity is at least 50 ppm. for copper sulfate to work properly. My pool used to be totally dark green when I opened it. I now use 2 to 3 table spoons of copper sulfate when I open it in the spring and it goes from green to clean in a bought 2 days. It may be a little cloudy at first, but when you get your alkalinity, chlorine, stabilizer, and PH where it belongs, it will clear up. I also use the same amount in the fall when I close it, but make sure you circulate the water for 2 days before you close it. Make sure you mix the copper sulfate with water in a plastic container, make sure the blue crystals are dissolved. I use a 2 gallon plastic container with a sprinkler head on it like you use to water flowers with, this makes it easy to sprinkle the copper sulfate mixed with water in the pool evenly. You can buy copper sulfate at your local hardware store or on ebay. I'm sorry this information is so long, but I know what you're going through, because I've been through it. I hope this helps you. P.S. I only use copper sulfate in the spring and the fall. I do not use it during the season as a chlorine substitute as some people say they do, as to much copper in your water can cause you problems.
To get rid of Chara algae, you can manually remove it from the affected area by using a rake or net. Applying an algaecide specifically designed to target Chara algae can also help eliminate it. Improving water circulation, reducing nutrient levels, and ensuring proper pond maintenance can prevent Chara algae from coming back.