Flock only works when the PH is above 8 (most pools are around 7.2 - 7.5). You have to raise the PH BEFORE you flock. I just did this very recently. My pool water had turned completely green, you couldn't see the bottom. I raised the PH (took and about 2 hours) then added the flock. Let the pump run on recirculate for 4 hours then turn it off overnight. Vacuum to waste, very slowly. This does involve topping off the water in the pool, letting everything settle down then vacuum some more. My total vacuuming time was 5 hours, but the pool was just a little cloudy when I finished, but no green water at all. It was worth the time and trouble to use the flock since I had been trying to get the green out for over a week, with no results. My algae was due to a construction project around my pool and granules from the new roofing got in the pool. The acid from the granules caused algae to grow very rapidly. That is what my pool dealer said to do and it worked great. Hope this helps.
chlorine is to clean it and you can also use salt,
Chlorine kills bacteria their for it will clean and disinfect your pool or hot tube
Well, whether it is illegal or not to clean a pool with people in it is unimportant, it is inadvisable considering that most of the chemicals that are added to a pool are hazardous until dissolved in the proper concentrations in the pool. Most of the chemicals used to balance or clean a pool need at least several hours and sometimes up to a day to disperse completely in the pool water. Some of the chemicals are relatively mild like baking soda, but others can be quite deadly to humans such as the chlorine and the acids used to adjust ph. never add shock to a pool when there are people in it. other chemicals should not be added either, even though they may not pose a threat.
To maintain water clarity in a cloudy pool, you can regularly clean the pool, balance the water chemistry, use a pool clarifier, and ensure proper filtration and circulation.
Yes, you may need to add chemicals to your pool to maintain proper water balance and sanitation. Common pool chemicals include chlorine for disinfection, pH adjusters to balance acidity levels, and algaecides to prevent algae growth. Regular testing and proper chemical treatment help keep your pool water safe and clean for swimming.
how to clean spit in a pool
How to maintain your swimming pool in winter Clean the pool. ... Balance pool water. ... Clean the filter. ... Check chlorine levels. ... Use a shock treatment. ... Remove algae as soon as you see it. ... Reduce filter-running times. ... Set your solar heater to winter mode.
The easiest way is for you to take a sample of the water you are putting in your pool in a clean bottle to your local pool shop. They Will test it and let you know exactly what is required to get the correct chemical to balance your pool water.
The amount of flock you should use in a 20-foot by 40-foot pool typically depends on the specific product instructions, but generally, you would use about 1 pound of flock for every 10,000 gallons of water. A pool of this size holds approximately 30,000 gallons, so you would need around 3 pounds of flock. Always follow the manufacturer's guidelines for optimal results.
To effectively clean and maintain your swimming pool using a DE filter, regularly backwash the filter, clean the filter grids, and monitor the pressure gauge to ensure proper filtration. Additionally, regularly test and balance the pool water chemistry to prevent algae growth and maintain clear water.
Well it depends if the pool is clean but if it is not clean it is a trashcan which means who ever owns that pool or public pool needs to clean it out, real good.
The most effective ways to clear up cloudy pool water are to regularly clean the pool, maintain proper chemical balance, shock the pool with a high dose of chlorine, use a pool clarifier, and run the pool filter for an extended period of time.