0
In the tank, you probably have a fill valve that has a round float that goes up and down on a shaft. There is a washer in the top of these that gets hard or plugs and will not let water in. The most common one of this type comes apart at the top and the washer is in the bottom part. A little bigger than a quarter with a small rod in the center. Replace this and the toilet should fill. It comes apart by holding the shaft so that it doesn't break and twisting the top 1/4 turn counter clock wise. Shut the water off before you do this.
What else can I help you with?
Why does the toilet hiss after flushing?
The toilet hisses after flushing because the fill valve is refilling the tank with water. The hissing sound is caused by the water flowing through the valve and into the tank.
What is the function of the Toto toilet fill valve and how does it contribute to the overall performance of the toilet?
The Toto toilet fill valve controls the water flow into the toilet tank, regulating the water level. It helps maintain proper flushing and refilling of the tank, ensuring efficient and effective flushing performance of the toilet.
Why does my toilet take forever to fill up after flushing?
Your toilet may take a long time to fill up after flushing due to issues with the water supply, a clogged fill valve, a malfunctioning flapper, or a problem with the float mechanism. These issues can restrict the flow of water into the tank, causing it to fill up slowly.
Why isn't my toilet flushing properly?
Your toilet may not be flushing properly due to a clog in the pipes, a malfunctioning flapper or fill valve, insufficient water in the tank, or a problem with the flush handle mechanism.
Why isn't the toilet flushing properly?
The toilet may not be flushing properly due to a clog in the pipes, a malfunctioning flapper or fill valve, insufficient water in the tank, or a problem with the flush handle mechanism.
What is flushing tank?
The tank above your toilet.
What is the purpose of the toilet tank fill tube and how does it contribute to the proper functioning of the toilet system?
The toilet tank fill tube is a small tube that refills the toilet tank with water after each flush. It is connected to the fill valve and helps regulate the water level in the tank. This tube ensures that the tank fills up to the correct level, allowing for proper flushing and efficient operation of the toilet system.
Why is my toilet not flushing correctly?
Your toilet may not be flushing correctly due to a clog in the pipes, a malfunctioning flapper or fill valve, insufficient water in the tank, or a problem with the flush handle or chain. It is recommended to check these components and address any issues to improve flushing performance.
Why is my toilet not flushing properly?
Your toilet may not be flushing properly due to a clog in the pipes, a malfunctioning flapper or fill valve, insufficient water in the tank, or a problem with the flush handle mechanism. It is recommended to check these components and address any issues to improve flushing performance.
How can I fix a toilet that is not flushing properly?
To fix a toilet that is not flushing properly, you can try checking the water level in the tank, adjusting the flapper or chain, cleaning the flush holes, or replacing the fill valve or flush valve if necessary.
After flushing and toilet tank is filled the basement pipes vibrate and make a loud sound?
Replace the fill valve or throttle down the isolation valve
Why is my toilet not flushing properly and what can I do to fix it?
Your toilet may not be flushing properly due to a clog in the drain pipe, a malfunctioning flapper or fill valve, or insufficient water in the tank. To fix it, you can try using a plunger to clear the clog, adjusting the water level in the tank, or replacing the flapper or fill valve if they are damaged. If these solutions do not work, you may need to call a plumber for further assistance.
