0
Put the mixture in a beaker then add some water. Stir until the sodium chloride is completely dissolved. Filter the water to get copper oxide as your residue. Then strongly heat the water till it evaporates, to form crystals of sodium chloride.
What else can I help you with?
Which method could be used to obtain copper from a mixture of powdered copper and sodium chloride?
Electrolysis can be used to separate copper from a mixture of powdered copper and sodium chloride. By passing an electric current through the mixture, the copper ions will be attracted to the negative electrode (cathode) where they will be reduced and deposited as solid copper. This process will allow the separation of copper from the sodium chloride.
How do you obtain copper sulfate crystals from a mixture of copper sulfate and sand?
To obtain copper sulfate crystals from a mixture with sand, you can dissolve the mixture in water. The copper sulfate will dissolve, while the sand will not. You can then filter the solution to separate the sand from the copper sulfate solution. By evaporating the water from the copper sulfate solution, you can obtain copper sulfate crystals.
How do you separate a dry mixture of ammonium chloride iron sugar and potassium iodide and obtain a dry sample of iron and ammonium chloride?
Do Not Kow
How do you separate a mixture of iodine and ammonium chloride?
First add water to mixture the ammonium chloride will dissolve in the water but the iodine does not. Filter out the iodine using filtration then use evaporation or distillation to obtain the ammonium chloride.
How would you obtain sodium chloride from a mixture of sodium chloride and sulphur without using water?
One way to obtain sodium chloride from a mixture of sodium chloride and sulfur without using water is by sublimation. Heating the mixture to a temperature where sulfur sublimes but sodium chloride does not can separate the two components. The sublimed sulfur can be collected separately, leaving behind sodium chloride.
How do you get powdered charcoal from a mixture of copper oxide and powdered charcoal?
To obtain powdered charcoal from a mixture of copper oxide and powdered charcoal, you can use a reduction reaction. Heat the mixture in a furnace or with a suitable heat source, as copper oxide will react with the charcoal (carbon) to form copper and carbon dioxide. The copper will be produced as a metal, leaving behind the powdered charcoal. After cooling, you can separate the unreacted charcoal from the copper.
How do obtain calcium chloride salt from a mixture of hydrochloric acid and calcium salt?
You can obtain calcium chloride salt by reacting hydrochloric acid with calcium carbonate. The reaction will produce calcium chloride and carbon dioxide gas. You can then evaporate the water to obtain solid calcium chloride salt.
How do you obtain CO from mixture of CO and CO2?
CO dissolves in Ammoniacal Cuprouys chloride solution.Hence when a mixture is passed through the above CO is absorbed,&CO2 passes through.
How do you obtain iodine from a mixture of powdered iodine and ammonium chloride?
Iodine is not soluble in water but soluble in organic solvents; ammonium chloride is soluble in water. Method 1: dissolving of the mixture in water, filtering, washing of the filter, recovery of iodine from the filter Method 2: dissolving of the mixture in chloroform, filtering, recovery of iodine from the solution by air evaporation at room temperature
How do you obtain iodine from a mixture of sodium chloride and iodine?
Iodine is not soluble in water but soluble in organic solvents; sodium chloride is soluble in water. Method 1: dissolving of the mixture in water, filtering, washing of the filter, recovery of iodine from the filter Method 2: dissolving of the mixture in chloroform, filtering, recovery of iodine from the solution by air evaporation at room temperature
Is solution of NaCl is a compound or element?
Sodium chloride is a compound, not an element. The solution is a homogeneous mixture./
How do you separate sand and copper sulphate and to obtain copper sulphate crystals in dry state?
copper sulphate is soluble.dissolve the two in water whereby cuso4 dissolves.filter the mixture the put the filtrate in an evaporating dish to evaporate excess water.do not evaporate to dryness coz some water ir required for crystalization.
