0
What else can I help you with?
What sequence do you go through to separate a mixture of water oil salt sand and steel feelings?
#1 remove the oil by separating funnel , the oil will float on the water. #2 magnet to remove the steel filings (Note the spelling) #3 filter to remove the sand . #4 evaporate to remove the water , and leave the salt.
Does the salt dissolve in vegetable oil?
no
How do you identify which is polar and non polar solvent?
Salt + Vegetable oil . The salt is the ionic solid and the vegetable oil is the nonpolar liquid
How do you separate a mixture of sand salt and oil?
Pour the oil and sand in a glass of water. The sand will sink to the bottom, and the oil will float to the top of the water.
Can salt will dissolve in vegetable oil without heating?
no it can not
Can you separate salt and water with a sieve?
It is virtually impossible to separate salt and water with a sieve unless the two materials have not been touched. This is because when salt is combined with water, it dissolves, and then it is mixed in with the water. To separate these two materials, you have to let the water evaporate, so then the salt is left.
Why do they call vegetable oil vegetable oil if it is not made from vegetables and is not healthy?
It is made from vegetables or grain if you want to be specific. This is to separate them from animal fats.
How do you separate a mixture of oil water sugar and sand?
First, use a funnel to separate the sand and sugar from the oil and water mixture. Then, you can use a separation technique such as decantation or centrifugation to separate the oil from the water. Finally, you can use a process like distillation or filtration to separate the oil from the water.
What do you need to make french fries?
you need potatoes , vegetable oil , and salt if you want salt
When you combine water and vegetable oil together why do they separate?
Because the oil is less dense then the water.
How do you separate salt and oil?
HOW TO SEPARATE SALT FROM OIL .First of all to separate salt from oil you need to pour some water, salt, and oil into a beaker in that order. .After you have put those materials in the beaker, you should see the salt dissolving, then you should be left with oil and water. .Next to separate the oil from the water you could either, leave the solution for a while and the oil eventually should rise to the top and float above the water, or you could use a funnel with a stopcock at the bottom which will allow you to drain the water out underneath the oil. GOOD LUCK! :)
Is vegetable oil homogeneous or heterogeneous?
It is heterogenous because if you set it out, it will eventually separate.
